Spa Device And Spa Module Properties; Spa Signal Properties - ABB SPA OPC Server User Manual

Configuring objects

4.4.3 SPA Device and SPA Module properties

Table 4-4 lists the default values for the SPA Device and SPA Module properties that you
can define.
Table 4-4: SPA Device/ Module properties
Name
Basic
Communication
Address
Unit Type
Simulation Mode

4.4.4 SPA Signal properties

The following tables list the default values for the SPA Signal properties that you can
define.
4.4.4.1 Double Indication
Table 4-5: Double Indication properties
Name
Basic
1MRS755221
Default values
1
Alarm Unit
Relay Unit
Default: Relay Unit
Simulation mode on
Simulation mode off
Default: Simulation mode off
Default values
Section 4 Engineering
Description
The unique communication address of the
device used in the communication with
SPA OPC Server. The broadcast
telegrams always use the address 900
and need not to be specified by this
property, range 0-899.
Defines the type of the connected device.
Specifies whether the device is in
simulation mode or not. It is possible to
configure a device into simulation mode.
This means that no data is exchanged
with a real device via SPA, but all the
process data is locally simulated and
stored by the OPC Server. Commands
(OPC item writes) will not be passed to
the SPA Network.
Description
49