Customer service Maintenance 12.1 Testing the network connection 12.2 Communication with Terminal Program 12.3 Repairs 12.3.1 Transfer and disposal Technical Data 13.1 Specifications 13.1.1 Dimensions 13.1.2 Accessories Glossary Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
If not avoided, this could result in minor or moderate bodily injury. CAUTION! Low risk: Indicates a potentially hazardous situation. If not avoided, this could result in property damage or risk of damage to the unit. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Install in accordance with the manufacturer's instructions in accordance with applicable local codes. Use only attachments/accessories specified by the manufacturer. Equipment change or modification could void the user's guarantee or authorization agreement. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
The Low Voltage power supply unit must comply with EN/UL 60950. The power supply must be a SELV-LPS unit or a SELV - Class 2 unit (Safety Extra Low Voltage - Limited Power Source). AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Federal Communications Commission, helpful: How to Identify and Resolve Radio-TV Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004-000-00345-4. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
Page 12
Cette brochure est disponible auprès du U.S. Government Printing Office, Washington, DC 20402, États-Unis, sous la référence n° 004-000-00345-4. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT. Disposal - Your Bosch product was developed and manufactured with high-quality material and components that can be recycled and reused. This symbol means that...
Bosch notices Video loss Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information. To minimize the risk of lost digital information, Bosch Security Systems recommends multiple, redundant recording systems, and a procedure to back up all analog and digital information.
Digital Equipment Corporation not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. This software is based in part on the work of the Independent JPEG Group. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
(PTZ control) – Password protection to prevent unauthorized connection or configuration changes – Event-driven, automatic connection (for example, at switch-on and for alarms) AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Page 17
Introduction | en – Fast, convenient configuration using the integrated Web server and a browser – Firmware update through flash memory – Convenient upload and download of configuration data Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
Two-way duplex audio is available in the unit for live voice communications or audio recording. 3.1.5 Alarm I/O The alarm input can be used to control the functionality of the unit. An alarm output can control external devices. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Web browser connections can be protected using HTTPS. Protect the control channels via the SSL encryption protocol. With an additional license, the user data itself can be encrypted. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
The browser application has an icon for saving the video images provided by the unit as a file on your computer's hard drive. Clicking this icon stores the video sequences and they can be replayed with the Player from Bosch Security Systems included with the package. 3.1.16...
Dinion IP Camera System Information | en Operation with external systems The camera can be used with a variety of Bosch software and hardware systems: – Bosch Video Management System – VIDOS video management software – DiBos 900 Series digital video recorder –...
Page 22
The Divar 700 Series of digital video recorders can view and record images from the camera via a network connection. The Divar 700 Series controls the camera so that the correct settings are used. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Adobe Acrobat Reader – Quick install instructions – Safety instructions If equipment has been damaged during shipment, repack it in the original packaging and notify the shipping agent or supplier. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
VIDOS, Bosch VMS, or DIBOS 900 Series – H.264 compatible hardware decoder from Bosch Security Systems (such as VIP XD) as a receiver and a connected video monitor – Divar 700 Series Digital Video Recorder The minimum PC requirements are: –...
Planning | en Install players Play back saved-video sequences using the Player from Bosch Security Systems. This can be found on the DVD-ROM supplied. to play back saved sequences using the Player, suitable ActiveX software must be installed on the computer.
It can be disabled in the Settings/Camera Settings/ Install options menu. By default, power is supplied to the camera via the Ethernet cable, compliant with the Power-over-Ethernet standard. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Note: For a DC supply the polarity is important. Incorrect polarity does not damage the camera but it will not switch on. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
A zero potential make-contact or switch can be used as the actuator (use a bounce-free contact system). Use the alarm relay output for switching external devices such as lamps or sirens. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
16 Ohm minimum; 3 Vpp maximum output voltage. Wiring: Shielded audio connection cable is advised. Observe maximum cable lengths for audio line input and output levels. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
Open the side panel on the camera and press the center button for longer than 2 seconds. This stops the IP video stream and enables the video analog output. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
RS232 is supported by this data connection. Note: To ensure surge and electrostatic protection, keep the cable length between the camera and external device to less than 3 meters. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
If a short circuit is detected on the lens connector, the message LENS SHORT CIRCUIT is shown. The lens circuit is automatically disabled to avoid internal damage. Remove the lens connector and check the pin connections. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Do not expose them, or point the camera/lens, to direct sunlight. Do not obstruct the free flow of air around the camera. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
To adjust back focus: Slide open the door panel at the side of the camera. Unlock the back focus locking button. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Manual-iris lens Unlock the back focus locking button. Adjust the lens to the maximum lens opening. Turn the back focus adjustment as required. Lock the back focus locking button. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
10 seconds to restore the factory defaults. This is useful to restore the default IP address or to restore a previous version of the firmware if uploading a new version fails. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Exit item. (This turns the IP video stream back on.) Some menus automatically close after about two minutes; other menus have to be closed manually. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
Select to fully open the iris. Follow the instructions below for setting the backfocus for your particular lens type. After focusing the object of interest remains in focus under bright and low light conditions. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Page 39
Selection Description Set LVL Only for video-iris lenses. Adjust the level control on the lens to center the level detector indicator (see below). EXIT Returns to Install menu. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
Restores all settings of the six modes to their default (factory) values. Select YES then press the Menu/Select button to restore all values. When completed the message RESTORED! is shown. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Note: The camera can also be connected to DIBOS 900 Series, VIDOS, Bosch Video Management System, and Divar 700 Series Digital Video Recorder, as well as third party video management systems.
If the connection is not established, the maximum number of possible connections may already have been reached. Depending on the device and network configuration, up to 25 web browsers, or 50 VIDOS or Bosch VMS connections are supported. 7.2.1 Password protection in camera A camera offers the option of limiting access across various authorization levels.
Make sure the devices are configured for the network environment and that the correct IP address for the remote location is set on the Alarm connections configuration page. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
Refer to Section 10 Operation via the browser, page 107 for more information. 7.5.3 SETTINGS Click SETTINGS in the application title bar to configure the camera and the application interface. A new page containing AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Page 45
Section 9 Advanced Mode, page 51 for more information on advanced settings. Note: It is recommended that only expert users or system administrators use the Advanced Mode. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
Note: When entering names do not use any special characters, for example &. Special characters are not supported by the internal recording management system. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Define and change a separate password for each level while logged in as service or if the device is not protected by a password. Enter the password for the selected level. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
RFC 868 protocol. Note: It is important to ensure that the date/time is correct for recording. An incorrect date/time setting could prevent correct recording. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
On to activate the automatic acceptance of DHCP-assigned IP addresses. Note: Certain applications (for example, Bosch Video Management System) use the IP address for the unique assignment of the device. If using these applications, the DHCP server must...
This page provides general information on the hardware and firmware system, including version numbers. No items can be changed on this page but they can be copied for information purposes when troubleshooting. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Clicking Set saves only the settings in the current window. Changes in any other windows are ignored. Click SETTINGS in the applications title bar to close the window without saving the changes made. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
Page 52
Note: When entering names do not use any special characters, for example &. Special characters are not supported by the internal recording management system. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
– user is the middle authorization level. This user can operate the device, play back recordings, and also control a camera but cannot change the configuration. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
Enter the current date. Since the device time is controlled by the internal clock, it is not necessary to enter the day of the week – it is added automatically. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Page 55
If there are empty lines at the bottom of the table, for example after deletions, add new data by marking the row and selecting values from the list boxes. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
If the Custom option is selected, enter values in the X and Y position fields. Display milliseconds If necessary, display milliseconds for Time stamping. This information can be useful for recorded video images; however, AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Page 57
Select On for the transmitted video images to be watermarked. After activation, all images are marked with a green W. A red W indicates that the sequence (live or saved) has been manipulated. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
The image can be stored on a local computer, a local network, or at an Internet address. JPEG interval Specify the interval at which the individual images should be generated for the M-JPEG image on the Livepage. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Motion+ mode, the sensor areas for motion detection are marked. Show event log The event messages are displayed with the date and time in a field next to the video image. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
File for system log Enter the path for saving the system log here. If necessary, click Browse to find a suitable folder. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
High resolution (4CIF/D1) with lower data rate – Low bandwidth High resolution (4CIF/D1) for low bandwidth connections – High resolution (4CIF/D1) for DSL connections at 500 kbps maximum Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
Page 62
Maximum data rate field. Maximum data rate This maximum data rate is not exceeded under any circumstances. Depending on the video quality settings for the AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Page 63
The basic setting Auto automatically adjusts to the optimum combination of movement and image definition (focus). Alternatively, use the slider to set a value between 9 and 51. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
Page 64
A value of 51 results in a very high refresh rate and lower image quality. Default Click Default to return the profile to the factory default values. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Click Preview << to close the preview displays. Note: Deactivate the display of the video images if the performance of the computer is adversely affected by the decoding of the data stream. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
The audio data requires an additional bandwidth of approximately 80 kbps for each connection. If you do not want any audio data to be transmitted, select Off. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Actual gain Displays the actual gain value from the camera to help compare gain level with lighting levels and picture performance. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
Page 68
Blue Gain Offsets factory white point alignment (reducing blue introduces more yellow). It is only necessary to change the white point offset for special scene conditions. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
A confirmation screen appears. Allow 5 seconds for the camera to optimize the picture after a mode reset. Note: The default IP address is restored. Connect to the camera again using this address. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
A Video Recording Manager (VRM) can control all recording when accessing an iSCSI system. The VRM is an external program for configuring recording tasks for video servers. For further information, contact your local customer service at Bosch Security Systems. 9.7.1 Storage Management Device manager...
Page 71
Rec. 1 stores stream 1, Rec. 2 stores stream 2. Check the boxes for the Overwrite older recordings option to specify which older recordings can be Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
Page 72
Click a storage medium in the Managed storage media list to select it. Click Remove below the list. The storage medium is deactivated and removed from the list. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
– Pre-alarm: recording takes place in the pre-alarm time, during the alarm and during the post-alarm time only. – Off: no automatic recording takes place. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
4CIF for complete frame rate and high image quality. Enter the required retention time in hours or days for each recording. Recording 1 corresponds to Stream 1, Recording 2 corresponds to Stream 2. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Click the date to be deleted. Click OK. The selection is removed from the table and the window is closed. Repeat for any other dates to be deleted. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
The graphic indicates the recording activity. An animated graphic is seen when recording is taking place. 9.7.5 Recording Status Details of the recording status are displayed here for information. These settings cannot be changed. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Only ten passwords can be defined here. Define a general password if more than ten connections are required, for example, when connections are initiated by a controlling Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
Page 78
| Advanced Mode Dinion IP Camera system such as VIDOS or Bosch Video Management System. The camera connects to all remote stations protected by the same general password. To define a general password: Select 10 in the Number of destination IP address list box.
Page 79
Select On to automatically re-established a connection to one of the previously specified IP addresses after each reboot, connection breakdown, or network failure. Audio Select On to transmit the audio stream with an alarm connection. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
This can lead to impairment of the VCA system. Observe the processor load and optimize the encoder settings or the VCA settings if necessary, or turn off VCA completely. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Analysis type Select the required analysis algorithm. By default, only Motion+ is available — this offers a motion detector and essential recognition of tampering. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
Page 82
Note: Additional analysis algorithms with comprehensive functions, such as IVMD and IVA, are available from Bosch Security Systems. Motion detector Motion detection is available for the Motion+ analysis type. For the detector to function, the following conditions must be met: –...
Page 83
Detect tampering of cameras and video cables by means of various options. Run a series of tests at different times of the day and night to ensure that the video sensor is operating as intended. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
Page 84
Activate this function if tampering associated with exposure to extreme light (for instance, shining a flashlight directly on the objective) should trigger an alarm. The average brightness of the scene provides a basis for recognition. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Page 85
If the selected area is too homogenous, so that concealing and moving the structure would not trigger an alarm, then an alarm is triggered immediately to indicate the inadequate reference image. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
Page 86
Right-click any fields to deactivate. Click OK to save the configuration. Click the close button (X) in the window title bar to close the window without saving the changes. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Assign the individual holidays to the VCA profiles, as described above. Deleting Holidays Delete defined holidays at any time: Click Delete. A new window opens. Click the date to delete. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
Page 88
| Advanced Mode Dinion IP Camera Click OK. The item is deleted from the table and the window closes. The process must be repeated for deleting additional days. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
A delay period may be useful in avoiding false alarms or frequent triggering. During the delay period, the Silent MOTION+ configuration is always enabled. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
Name The name makes it easier to identify the alarm in extensive video monitoring systems, for example with the VIDOS and Bosch Video Management System programs. Enter a unique and clear name here. Signal Ranges Exclude particular signal ranges in order to avoid false alarms.
Obtain information on operating your cellphone from your cellphone provider. Attach JPEG from camera Check the box to specify that JPEG images are sent from the camera. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
Page 92
This makes it easier to identify the origin of the e-mail. Test e-mail Click Send Now to test the e-mail function. An alarm e-mail is immediately created and sent. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
If the transfer was successful, the message Script successfully parsed. is displayed over the text field. If it was not successful, an error message is displayed with further information. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
Select Open for the relay to operate as an N.O. contact, or select Closed if the relay is to operate as an N.C. contact. Select Select External device or Motion+/IVA to trigger the relay. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Stop bits Select the number of stop bits per character. Parity check Select the type of parity check. Interface mode Select the desired protocol for the serial interface. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
If a DHCP server is employed in the network for the dynamic assignment of IP addresses, activate acceptance of IP addresses automatically assigned to the device. Certain applications (VIDOS, Bosch Video Management System, Archive Player, Configuration Manager) use the IP address for the unique assignment of the device. If using these...
Page 97
The camera uses the TLS 1.0 protocol. Ensure that the browser has been configured to support this protocol. Also ensure that Java application support is activated (in the Java Plug-in Control Panel of the Windows Control Panel). Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
Page 98
The potential value depends on the network structure. A higher value is only useful if the iSCSI system is located in the same subnet as the camera. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Page 99
To transfer the IP address of the device, click the Register button. Status The status of the DynDNS function is displayed here for information purposes; these settings cannot be changed. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
Enter the user name that the Radius server uses for the camera in the Identity field. Enter the Password that the Radius server expects from the camera. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Multicast Address Enter a valid multicast address to be operated in multicast mode (duplication of the data stream in the network). With the Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
Date/time suffix: The date and time are automatically added to the file name. When setting this parameter, ensure that the date and time of the device are always set AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Enter an exact path to post the images on the FTP server. 9.10.5 Encryption If an encryption license is installed, this submenu gives access to the encryption parameters. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
The latest firmware can be obtained from your customer service center or from the Bosch Security Systems download area. To update the firmware: First, store the firmware file on your hard disk.
Page 105
Enter the full path of the file to upload or click Browse to locate the file. Click Upload to start the file transfer. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
Keep this information at hand when seeking technical support. Select the text on this page with a mouse and copy it so that it can be pasted into an e-mail if required. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
When accessing the camera with a browser, the processor load and network information is available in the upper right of the window next to the Bosch logo. Move the mouse cursor over the icons to display numerical values. This information can help with problem solving or when fine tuning the device.
10.1.6 Saving snapshots Individual images from the video sequence that is currently being shown on the Livepage can be saved in JPEG format on the computer's hard drive. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Click the recording icon again to stop recording. Play back saved video sequences using the Player from Bosch Security Systems. 10.1.8 Running recording program The hard drive icon below the camera images on the Livepage changes during an automatic recording.
If required, drag the green arrow to the point in time at which the playback should begin. – Red bars indicate the points in time where alarms were triggered. Drag the green arrow to navigate to these points quickly. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Page 111
To do this, place the mouse cursor in the timeline below the timescale and turn the scroll wheel. Playback is automatically stopped (paused) during scrolling. Trick mode requires significantly higher memory capacity and computing power. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
Does the camera transmit all the data required? – Does the camera respond as desired to alarm events? – Is it possible to control peripheral devices, if necessary? AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Check the data within the LAN. transmission with ping. The maximum number of Wait until there is a free connections has been connection and call the reached. transmitter again. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
Page 114
The interface parameters Make sure that the do not match those of the settings of all units other unit connected. involved are compatible. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
11.3 Customer service If a fault cannot be resolved, please contact your supplier or system integrator, or go directly to Bosch Security Systems Customer Service. The version numbers of the internal processors can be viewed on a special page. Please note this information before contacting Customer Service.
Disconnect the camera from the Ethernet network before working with the terminal program. Connect the serial interface of the camera using any available serial interface on the computer. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Page 117
IP address. Enter the desired IP address and press Enter. The terminal program displays the new IP address. Use the displayed commands for any additional settings you require. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
Defective or superfluous devices and parts should be disposed of professionally or taken to your local collection point for hazardous materials. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Checker board, Cross hatch, UV plane Synchronization Internal, Line Lock ALC lens Video or DC iris auto detect Controls OSD with softkey operation, Web browser Control feedback Actual shutter, Actual gain Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
Page 120
Bottom and top 1/4" 20 UNC Dimensions (H x W L) 58 x 66 x 122 mm (2.28 x 2.60 x 4.80 in) without lens Weight without lens 524 g (1.155 lb) AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Page 121
Technical Data | en 121 Operating -20 °C to +50 °C (-4 °F to +122 °F) temperature Operating -20 °C to +45 °C (-4 °F to +113 °F) temperature (IVA) Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
122 en | Technical Data Dinion IP Camera 13.1.1 Dimensions (4.646) (3.346) (1.339) 1/4"-20 UNC Dinion2X D/N IP 1/4"-20 UNC (1.889) (4.803) (2.598) mm (in) Figure 13.1 Side and front dimensions AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
220 VAC, 50 Hz, 24 VAC, 20 VA Out UPA-2450-50 Power Supply – 220 VAC, 50 Hz, 24 VAC, 50 VA Out Contact your Bosch representative for the latest available accessories. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
IP address and other configuration parameters to computers on a network (Internet or LAN). Domain Name Service: A service that stores domain names and translates them into Internet Protocol (IP) addresses. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Page 125
Identification: a machine readable character string. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
Page 126
It is controlled by a network operating system and uses a transfer protocol. Logical Unit Number: logical drive in iSCSI storage systems. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Page 127
Optical Fiber: now used predominantly as the transmission medium for line-borne telecommunication processes (glass fiber cable). Parameters Values used for configuration. QCIF Quarter CIF: video format with 176 × 144/120 pixels (see CIF). Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
Page 128
Subnet maskSee Net mask. Transfer Control Protocol Telnet Login protocol with which users can access a remote computer (Host) on the Internet or local area network (LAN) connections. AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...
Page 129
Unshielded Twisted Pair: A variant of twisted pair cabling, UTP cable is not surrounded by any shielding. Wide Area Network: A long distance link used to extend or connect remotely located local area networks. Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06...
Page 130
130 en | Glossary Dinion IP Camera AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems...