Items Included - Pioneer DRM-7000 Operating Instructions Manual

Read before use
Power supply unit [DRM-PW701] (for DRM-7000)
A DRM-PW701 add-on power supply unit must be installed
in order to use 9 or more drives within the same changer.
Always be sure to contact Pioneer service personnel for
installation.
Power supply: Maximum of DC +5V, 12A
Maximum of DC +12V, 8A
Malti drive connector panel [DRM-SN721]
The DRM-SN721 multi drive connector panel comes with a
cable which may be used to connect two internal drives.
The DRM-7000/DRM-3000 comes with a DRM-SN721 panel
as a standard equipment, and this panel may be used to
connect 2 or 4 additional drives in a daisy chain.
Single drive connector panel [DRM-SN711]
The DRM-SN711 single drive connector panel is used when
a drive is to be connected directly to a host computer or when
drives are to be daisy-chained outside of the changer unit.
Cable for 2 drives [DRM-SC721]
The DRM-SC721 2-drive SCSI cable is designed for internal
daisy-chain connection to additional two drives. When used
in combination with the DRM-SN721 multi drive connector
panel, this cable makes it possible to connect up to 4 internal
drives.
Cable for 4 drives [DRM-SC741]
The DRM- SC741 4-drive SCSI cable is designed for internal
daisy-chain connection to additional four drives. When used
in combination with the DRM-SN721 multi drive connector
panel, this cable makes it possible to connect up to 6 internal
drives.
10
<DRC1184>
En

ITEMS INCLUDED

20-disc hyper magazine ... 1
Changer/drive SCSI cable ... 1
Power cord (for Canada and the U.S.) ... 1
Power cord (for Japan) ... 1
Base stabilizer
DRM-7000: 4
This type of power cord is for use
in America and Canada only.
Do not use this power cord in places
other than America or Canada.
This type of power cord is for use
in Japan only.
Do not use this power cord in a
places other than Japan.
DRM-3000: 2