Tc/Ub (Items For Setting Up The Time Code Or User Bit) - Sony Nxcam HXR-NX70U Operating Manual

Format
See page 58.
Repair Img. DB F.
See page 103, 105.
File Number
You can select the way to assign file number
of photos.
 Series
Assigns file numbers of photos in sequence.
The file number becomes larger each time
you record a photo.
Even if the memory card is replaced with
another one, the file number is assigned in
sequence.
Reset
Assigns file numbers in sequence, following
the largest file number existing on the
recording medium.
When the memory card is replaced with
another one, the file number is assigned for
each memory card.
US
0
TC/UB
(Items for setting up the time
code or user bit)
TC/UB Disp
See page 47.
TC Preset
See page 48.
UB Preset
See page 48.
TC Format
You can select the frame mode.
 DF
Sets the frame mode to the drop frame mode.
NDF
Sets the frame mode to the non-drop frame
mode.

Notes
When recording in HD 1080/24p, the frame

mode is fixed to [NDF].
Tips

Although 30 frames are considered as 1

second in time code processing, the actual
frame frequency of an NTSC image signal is
29.97 frames/sec. As a result, the time code
gradually lags behind real time as the recording
gets longer. The drop frame function adjusts
the time code to real time. In the drop frame
process, the first 2 frames of each second are
not recorded except in every tenth minute.
Recording without the drop frame process is
called non-drop frame recording.