Connecting Digital Photo Frame To Power; Inserting A Memory Card - Motorola MBP701 User Manual

2.2 Connecting Digital Photo Frame to
power
1. Insert the small plug of the power adapter into the DC
socket at the bottom of the stand of the digital photo
frame.
2. Plug the other end of the power adapter into a mains
socket.
3. When the digital photo frame is powered off, press and
hold the power key at the back of digital photo frame
until the Link Indicator is on. When the power is on
then it will search for and link with the camera unit.
GETTING STARTED
POWER PLUG
NOTE
Only use the provided power adapter.
2.3

Inserting a memory card

On the side of the Digital Photo Frame, you can also insert
a memory card or a USB flash drive containing the content
you want to show on this unit. Your Digital Photo Frame
supports SD, SDHC and MMC memory cards with a
memory capacity of 2GB or up to 16GB.
To insert a memory card, push the card firmly into the
memory card slot in the direction as indicated above, with
the metal contacts of the card facing towards the picture
frame.
9