4.7.3. Transparent Mode Scenarios
Example 4.15. Setting up Transparent Mode for Scenario 2
Configure a Switch Route over the LAN and DMZ interfaces for address range 10.0.0.0/24 (assume the WAN
interface is already configured).
Web Interface
Configure the interfaces:
1.
Go to Interfaces > Ethernet > Edit (lan)
2.
Now enter:
•
IP Address: 10.0.0.1
•
Network: 10.0.0.0/24
•
Transparent Mode: Disable
•
Add route for interface network: Disable
3.
Click OK
4.
Go to Interfaces > Ethernet > Edit (dmz)
5.
Now enter:
•
IP Address: 10.0.0.2
•
Network: 10.0.0.0/24
•
Transparent Mode: Disable
•
Add route for interface network: Disable
6.
Click OK
Configure the interface groups:
1.
Go to Interfaces > Interface Groups > Add > InterfaceGroup
2.
Now enter:
•
Name: TransparentGroup
•
Security/Transport Equivalent: Disable
182
Chapter 4. Routing