Advertisement
Using The Touch Pen With A PC
6
Run the touch monitor function on the TV as shown below.
Select Touch Home in the home menu as below.
Select the input connected to the PC.
Select external input connected to PC used to install Pentouch program.
For laptops, see the Laptop Owner's Manual and set the laptop to display its screen on the TV screen.
Method 1 :
On your laptop, press the "Fn" + "switch screen" key on the keyboard to display the computer screen on your
TV screen,
then set the display resolution to 1024 x 768 for PH/PN47** models and 1920 x 1080 for PN57**, PH66**,
PH/PN67** models.
* The switch screen key of the laptop may be subject to change by the manufacturer.
LG
SAMSUNG
Fn+F7
Method 2 :
Open the control panel of the graphics card on your computer.
Set [Display Mode] to the [Single Display] mode, then select [LG TV] for the display to use.
* Set the display resolution to1024 x 768 for PH/PN47** models and 1920 x 1080 for PN57**, PH66**,
PH/PN67** models.
NOTE
The Pentouch function is not supported in [Extend these displays] mode. Display the same screen
on both the laptop and the TV screen, or display it only on the TV.
6
TG
Fn+F4
Fn+F7
HP
TOSHIBA
Fn+F5
Fn+F5
Touch Home
Sony
Fn+F7
Advertisement
