Lcd video monitor, high-quality images, advanced functions, low power consumption and excellent cost-performance. an 47 cm (18.5 inches) lcd monitor for diverse broadcasting needs (6 pages)
How to use the on-screen menus Four kinds of information—menus, status displays, image control settings and battery voltage—can be displayed on the screen. Menu display This display appears when the MENU/EXIT button is pressed. If no further action is taken for the next 120 [ M A I N M E N U ] seconds, the display will be automatically cleared.
How to use the on-screen menus Image control display The image control information is displayed when an image has been adjusted using the image controls. (Refer to page It appears when a control has been pressed in so that it has popped out or when an adjustment is made by turning an already popped out control.
Menu operations Menu operations Use the HD ZOOM/X button and BLUE/W button to change the setting, and press the FUNCTION/ENTER button to enter the change. When the MENU/EXIT button is pressed, the main Alternatively, the change will be canceled when the menu appears on the screen.
User data This monitor enables the menu settings and screen values which have been adjusted by the image controls to be saved in five user data files which can then be loaded as required. The following data can be saved and loaded as user data files: ≥...
MAIN MENU Menu configuration MAIN MARKER SELECT MARKER MARKER 16:9 MARKER 4:3 GAMMA SELECT MARKER BACK VIDEO CONFIG FILM GAMMA CENTER MARKER COLOR TEMP. GPI PRESET1 SHARPNESS MODE GPI PRESET2 SHARPNESS H SHARPNESS V I-P MODE MONO SD ASPECT BACKLIGHT SYSTEM CONFIG FUNCTION BATTERY REMAIN...
MAIN MENU Menu items MARKER Item Setting Description Item Setting Description MARKER SELECT MENU For setting whether the marker display GPI PRESET1 For setting the markers to be displayed if, settings are to be performed using the 13:9 when MARKER1 ON/OFF has been menu or from the GPI connector.
MAIN MENU Types of markers 16:9 markers (These appear when HD signals or when SD signals with a 16:9 aspect ratio are supplied.) Markers are displayed only in the form of vertical lines. The shaded areas indicate what is set by the MARKER 80% area markers BACK item.
MAIN MENU VIDEO CONFIG Item Setting Description Item Setting Description GAMMA SELECT For setting the gamma mode. SHARPNESS H For setting the image sharpness in the NORMAL GPI: This is the GPI setting. horizontal direction. FILM details, refer “REMOTE This item enables two settings, one for the specifications”...
MAIN MENU SYSTEM CONFIG OSD CONFIG Item Setting Description Item Setting Description BACKLIGHT For adjusting the backlight brightness to a BATTERY REMAIN OFF For selecting whether to display the level from 0 to 60. The higher the setting, remaining battery charge. the brighter the backlight.
MAIN MENU INPUT SELECT Item Setting Description Item Setting Description SDI1 * For setting whether the SDI 1 signals can SDI2 * For setting whether the SDI 2 signals can be selected when the channels are to be be selected when the channels are to be switched using the INPUT button.
Page 12
MAIN MENU INPUT SELECT CONTROL Item Setting Description Item Setting Description FORMAT AUTO For selecting the signals whose input is to CONTROL LOCAL For selecting where the operations are to 1080/60I be accepted in the YPBPR mode and in the REMOTE be initiated.