WEP key settings
In an ad-hoc network, all devices must use the same WEP
key.
Select
WLAN security settings
from the following:
WEP encryption
— Select the desired WEP encryption
•
key length.
WEP key format
— Select whether you want to enter
•
the WEP key data in
ASCII
WEP key
— Enter the WEP key data.
•
802.1x security settings
Select
802.1x
as the WLAN security mode.
802.1x
authenticates and authorises devices to access a
wireless network, and prevents access if the authorisation
process fails.
Select
WLAN security settings
WPA/WPA2
— Select
•
Protocol) or
Pre-shared key
device identification).
EAP plug-in settings
•
EAP, select which EAP plug-ins defined in your device
to use with the access point.
Pre-shared key
— If you selected
•
shared
key, enter the shared private key that
identifies your device to the WLAN to which you
connect.
© 2008 Nokia. All rights reserved.
WEP key settings
>
or
Hexadecimal
format.
and from the following:
EAP
(Extensible Authentication
(a secret key used for
— If you selected
WPA/WPA2
WPA/WPA2
WPA security settings
Select
WPA/WPA2
Select
WLAN security settings
and
WPA/WPA2
•
Protocol) or
device identification).
EAP plug-in settings
•
EAP, select which EAP plug-ins defined in your device
to use with the access point.
Pre-shared key
•
shared
key, enter the shared private key that
identifies your device to the WLAN to which you
connect.
WPA2 only mode
•
(Advanced Encryption Standard) encryption, select
Off. To allow AES only, select
Wireless LAN plugins
Select
Menu
>
Access
points.
The EAP (extensible authentication protocol) plug-ins are
>
used in wireless networks to authenticate wireless
devices and authentication servers, and the different EAP
plug-ins make possible the use of various EAP methods
Pre-
>
(network service).
You can view the EAP plug-ins currently installed in your
device (network service).
as the WLAN security mode.
and from the following:
— Select
EAP
(Extensible Authentication
Pre-shared key
(a secret key used for
— If you select
— If you select
WPA/WPA2
— To allow both TKIP and AES
On
Tools
Settings
Connection
>
>
WPA/WPA2
>
Pre-
>
>
129