Pin - Siemens HiPath 2000 Operating Manual

Programming the Handset
Step by Step
s
Settings
s

PIN

[- - - ]
[0077]
[- - - ]
124
PIN
You can protect your optiPoint WL 2 professional
against unauthorized access by setting a PIN. You are
then prompted to enter the PIN when you activate the
handset
These entries can also be changed via the Web inter-
face
t
Open the main menu.
2
Enter the code.
or
OK
Select and confirm.
OK
Select and confirm.
~
Enter the current PIN in the "Old PIN: " entry field (if
available).
and
OK
Confirm.
~
Enter the new PIN in the "New PIN:" entry field (four dig-
its, 0 to 9).
or To remove PIN protection:
Do not make an entry.
Save
Press the display key to save the change.
" u
or Quit the menu.
Page 15.
Page 132.
Your handset will block after three failed at-
tempts to enter the PIN and can only be un-
locked by your service personnel.