NEC Express5800 Configuration Manual page 18

CONFIGURATION GUIDE
4.1.3 Non-hot Plug 3.5-inch Drive Configuration
Non-RAID
RAID 0/1/10
RAID 5/6/50/60
NOTE:

Embedded SATA RAID controller is supported only on Windows operating systems. An optional RAID
controller is required to configure RAID array for other operating systems.

Embedded SATA RAID Controller does not support RAID 10 configured with 2TB and 3TB HDDs.

Hot plug insertion/removal is not supported with the Embedded SATA non-RAID controller.

All hard drives within a RAID array should be of the same capacity.

An optional RAID controller occupies one PCI slot.

For optional RAID controller driver to install Windows Server 2003 R2, download from the NEC
website at:
http://www.nec.com/en/global/prod/express/download/index.html
NEC Corporation
–
NEC Express5800/T120d
Embedded SATA
RAID Controller
Optional RAID
Controller
Revision 7.0 – October 25, 2013
Refer to
Refer to
512 MB Cache Refer to
512 MB Cache Refer to
1GB Cache
Refer to
Available Interface
4.4.1
SATA
4.4.2
SATA
4.4.3
SATA
4.4.4
SATA
4.4.5
SATA
18