Husqvarna 700DRT Owner's Manual page 14

Powered rotary tillers
Hide thumbs Also See for 700DRT:
Table of Contents

Advertisement

COOLING SYSTEM (See Fig. 22)
Your engine is air cooled. For proper engine performance
and long life keep your engine clean.
Clean air screen frequently using a stiff-bristled-
brush.
Remove blower housing and clean as nec essary.
Keep cylinder fi ns free of dirt and chaff.
MUFFLER
Do not operate tiller without muffl er. Do not tamper with
exhaust system. Damaged muffl ers or spark arresters could
create a fi re hazard. Inspect pe ri odically and re place if nec-
essary. If your engine is equipped with a spark arrester
screen assembly, re move every 50 hours for cleaning and
inspection. Re place if dam aged.
MAINTENANCE
BLOW ER
HOUSING
AIR SCREEN
FIG. 22
SPARK PLUG
Replace spark plugs at the beginning of each tilling sea-
son or after every 50 hours of use, whichever comes fi rst.
Spark plug type and gap setting is shown in "PRODUCT
SPECIFICA TIONS" on page 3 of this manual.
TRANSMISSION
Once a season, lubricate the right hand side gear case
grease fi tting with 1 oz. of EP #1 Grease.
CLEANING
Do not clean your tiller when the engine and transmission
are hot. We do not rec ommend using pressurized water
(garden hose, etc.) to clean your unit un less the gasket
area around the trans mission and the engine muf fl er, air
fi l ter and car bu retor are cov ered to keep wa ter out. Wa ter
in en gine will short en the useful life of your tiller.
Clean engine, wheels, fi nish, etc. of all foreign mat-
ter.
Keep fi nished surfaces and wheels free of all gas oline,
oil, etc.
Protect painted surfaces with au tomotive type wax.
14

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents