NAMES OF PARTS
OPERATION PANEL
Water supply
lamp (red)
The lamp will flash when the
water within the tank becomes
empty.
(Page 12)
Power ON/OFF
button
Power is turned on and off.
(Page 11)
Operation display lamp
Displays the operation mode.
<Humidity setting>
(Green)
Set humidity guide
About 60%
About 50%
About 40%
8
(Page 11,13)
<Auto humidification> (Green)
Performs auto humidification operation.
<Silent> (Yellow)
Performs continuous silent operation.
<Continuous> (Red)
Performs continuous operation using maximum humidifying
capacity.
(Page 11,13)
During <Silent> and <Continuous> operations, the unit will stop when
the humidity of the intake port reaches 80% or higher.
(To prevent condensation.)
In case of bad condensation, operate the unit in humidity setting
mode (between 40 ~ 50).
(Condensation may not be completely removed in some cases.)
If the operation display lamp flashes, see Page 18.
Humidity display
lamp (green)
When the humidifier is in operation, the
current humidity is displayed.
65% or more
55 ~ 64%
45 ~ 54%
35 ~ 44%
Less than 35%
(Page 11,13)
(Page 11,13)