Configuring Other Settings - General; Operation; Menu Timeout; Scan Encrypted Channels - Toshiba 48L344 DG Online Manual

Configuring Other Settings - General

You can configure the settings of your TV. Select
Settings from main menu and press OK to view the
Settings menu. Press the MENU button on the remote
control to exit.
To view general configuration preferences, select
Other Settings in the Settings menu and press OK
button.

Operation

• Press Up or Down button to select an item.
• Use Left or Right button to set an option or press
OK button to view a sub-menu.

Menu Timeout

To set a specific display timeout for menu screens,
set a value for this option.
In the Other Settings menu, select Menu Timeout
and choose 15 sec, 30 sec, 60 sec or Off using Left
or Right button.

Scan Encrypted Channels

When this setting is set as Yes, search process will
locate the encrypted channels as well. If it is set as
No manually, encrypted channels will not be located
while in automatic search or manual search. Scan
Encrypted Channel feature will always be Yes after
performing first time installation.
• In the Other Settings menu, use Up or Down button
to select Scan Encrypted.
• Press Left or Right button to set this function as
Yes or No.
Other Controls -
English - 32 -
continued

Blue Background

If the signal is weak or absent, the TV can automatically
change to a blue screen. To enable this, set Blue
Background to On from.
• The Other Settings menu, Background and select
On or Off using Left or Right button.

Software Upgrade

This feature helps to keep your TV updated. It works
automatically and searches for new information when
available and selected.
You can enable or disable automatic upgrade by the
Automatic Scanning option.
You can manually start searching for new software by
selecting Scan for upgrade and pressing OK button.
You can select the satellite, which is used for updating
process by setting Edit Upgrade for Satellite option.
Press or MENU button to cancel the process.

Application Version

Displays the current application version.

Hard of Hearing

If the broadcaster enables any special signal
concerning the audio, you can set this setting as On
to receive such signals.
• Use Up or Down button to select Hard of Hearing
and then press Left or Right button to set this setting
as On or Off.

Audio Description

Audio description refers to an additional narration
track for blind and visually impaired viewers of visual
media, including television and movies. The description
narrator talks through the presentation, describing
what is happening on the screen during the natural
pauses in the audio (and sometimes during dialogue,
if deemed necessary). You can use this feature, only if
the broadcaster supports that additional narration track.
• Highlight Audio Description by pressing Up or
Down button.
• Press OK button to enter Audio Description
submenu.
• Use Up or Down button to select Audio Description
setup and then press Left or Right button to set
this setting.