Follow Me - Siemens Hicom 300 Operating Instructions Manual

This feature allows you to activate call forwarding at a remote extension to
enable calls to follow you from extension to extension.
Activate Follow Me
When you arrive at the remote extension where you wish to receive calls made
to your extension.
- dial ∗ ∗ ∗ ∗ ∗ 25 and your PIN number
- dial ∗ ∗ ∗ ∗ ∗ 10
- Call Forward LED on (if equipped)
Incoming calls to your extension will now be diverted to this extension. When
you activate this feature it transfers various facilities to this extension e.g.
Barring Restrictions, Stored No. Redial etc.
Cancel Follow Me
At the remote extension
- first dial 10 (this cancels your Call Forwarding)
- Call Forward LED goes off (if equipped)
- dial 25 (this cancels your PIN)
NB Should you forget to cancel your PIN and Call Forward at the remote
extension, contact the extension and ask them to dial 25. The Call
Forward must be cancelled from your extension in this case.
The ID will however be automatically cancelled if the extension is not
used for a predetermined time.
The Call Forward can be cancelled from your own extension.

Follow Me

19