LG 32LG40 Training Manual page 40

MAIN PWB Removal
MAIN PWB Removal
Remove the Right side decorative plastic piece by removing top and bottom screws.
Remove the remaining 6 screws that remove the "Shield" covering the Main PWB.
Careful at this point, the PWB will
Swing free of the supports.
Disconnect P902, P800, P901,
P900, P904, P401 and P500
Note: In the top right is a
connector P200. This is an open
connection. (Software Upgrades)
Remove the 2 screws securing
the Side input decorative plastic
piece on the right.
Remove the 4 screws securing
the Main PWB indicated below in
red.
LCD DV 32LG40
40