Network Interface Controller - NEC Express5800 Configuration Manual

CONFIGURATION GUIDE
Supported PCI Cards and Installable
card supported.
6.1

Network Interface Controller

Category
GbE
10GbE
NEC Corporation
–
NEC Express5800/R120d-1E
Product Name / Description
1000BASE-T Adapter
Broadcom ® BCM5718 Gigabit Ethernet Controller
PCIe 2.0 x1
Dual Port 1000BASE-T Adapter
Broadcom ® BCM5718 Gigabit Ethernet Controller
PCIe 2.0 x1
Dual Port 1000BASE-T Adapter
Intel® 82580 Gigabit Ethernet Controller
PCIe 2.0 x4
Quad Port 1000BASE-T Adapter
Broadcom ® BCM5719 Gigabit Ethernet Controller
PCIe 2.0 x4
NOTE:
- Network cables with RJ-45 plug covers cannot be used.
- Jumbo frames are supported.on Windows Server 2008 R2
and Redhat Enterprise Linux operating systems.
Ctrlr 10GBASE Adapter (SFP+/2ch)
Broadcom NetXtreme II BCM957711 10G SFP+ Dual Port
Network Interface Card
PCIe 2.0 x8
NOTE:
- N8104-129 SFP+ Module is required to connect with an
optical cable.
- Up to 2 SFP+ Modules can be installed.
- Supports up to 2 adapters covering 10Gb Converged Network
Adapter and 10Gb Network Adapter.
Dual Port 10Gb Converged Network Adapter
BROCADE 1020 Dual Port 10Gbps Converged Network Adapter
PCIe 2.0 x8, 2 x SFP modules, Max. one adapter
NOTE:
- Supports up to two adapters of10Gb Converged Network
Adapter and 10Gb Network Adapter.
Module SFP+ Module (10G-SR)
1 x SFP+ Module for N8104-128
Revision 7.0 – October 25, 2013
Slots with regard to the position of PCI slot which can mount PCI
Part Number
N8104-138
N8104-132
N8104-145
N8104-133
N8104-128
N8104-131
N8104-129
33