"MANAGE"
Configure the settings for the administrator and hardware on "MANAGE". Categorized into "COMMON SETTINGS",
"MEDIA MANAGEMENT" and "TURN OFF CAMERA".
"COMMON SETTINGS"
Change the settings of the administrator and camera.
1
2
3
4
5
6
7
1 "CAMERA NAME"
Enter 1 to 15 characters for the camera name
displayed during viewing. (1 byte alphanumeric
characters only)
2 "CHANGE ADMINISTRATOR USER/PASSWORD"
Click the "UPDATE" button on the right to change
the user name and password of the administrator. (
➭ page 16)
3 "CLOCK ADJUST"
Click the "SET" button on the right to set the
internal clock. ( ➭ page 15)
4 "DATE DISPLAY STYLE"
Select "year.month.day", "day.month.year",
or "month.day.year" for the format of the date
displayed during viewing.
In addition, select "12H" (12-hour format) or "24H"
(24-hour format) for the time display.
5 "AUTO POWER OFF"
Select "OFF" or "ON" for the function that turns
off the power automatically if the unit runs with
the battery and no operation is performed for 5
minutes.
6 "UPDATE"
Write the update data on the SD card, and then
click the "EXEC" button to update the firmware. ( ➭
page 57)
7 "FACTORY PRESET"
Click the "EXEC" button to reset all the settings to
factory default. ( ➭ page 56)
46
"MEDIA MANAGEMENT"
Format the SD card.