Brother MFC-J6920DW Basic User's Manual page 81

e
Swipe up or down, or press a or b to
display Setup Receive.
f
Press Setup Receive.
g
Swipe up or down, or press a or b to
display Remote Codes.
h
Press Remote Codes.
i
Do one of the following:
 If you want to change the Remote
Activation Code, press Act.Code.
Enter the new code, and then press
OK.
 If you want to change the Remote
Deactivation Code, press
Deact.Code.
Enter the new code, and then press
OK.
 If you do not want to change the
Codes, go to step j.
 If you want to turn the Remote Codes
Off (or On), press Remote Codes.
Press Off (or On).
j
Press .
NOTE
• If you are always disconnected when
accessing your external TAD remotely, try
changing the Remote Activation Code and
Remote Deactivation Code to another
three-digit code using the numbers 0-9, l,
#.
• Remote Codes might not work with some
telephone systems.
Telephone and external devices
7
71