Hitachi DF2200 Owner's Manual page 51

DVD Mode (Cont.)
USB 2 / Memory Card playback
1. (a) To play back content from a USB storage device, insert the USB
device into the USB2 port at the side of the unit, next to the DVD
compartment.
(b) To play back content from a memory card, insert the SD/MMC/
MS card into the card slot at the side of the unit, next to the DVD
compartment.
2. Use the / /
press OK to confirm.
3. Use the / /
start playback.
4. In the file selection page, press the
previous or next page.
5. Press the REPEAT button on the remote control to change the play mode.
- SINGLE: play one file only.
- REPEAT ONE: repeat one file.
- REPEAT FOLDER: all the files in the folder will be played repeatedly.
- FOLDER: all the files in the folder will be played.
NOTE: The available repeat modes may vary for different devices.
Important notes
To play multimedia files under DVD mode, make sure to connect your USB
memory device to the correct terminal (the USB2 port at the side of the unit)
and select the correct input source.
The maximum capacity of your USB memory device is limited to 4GB.
PVR and time-shift functions cannot be used in DVD mode.
/ buttons to select the folder you want to play, then
/ buttons to select the desired file, then press OK to
or button to turn to the
45