Table of Contents
Advertisement
l
R.SP. (rear speakers)
-LARGE: Normally select this. Specify the position and height to implement the Digital
Cinema Surround modes in the sound field (page 49) properly.
-SMALL:
Select this if the small speakers are used for the rear speaker. Specify the position
and height to implement the Digital Cinema Surround modes in the sound field (page 49)
properly.
-NO: Select this if no rear speakers are used.
l
S.W. (subwoofer)
-YES: Select this if the subwoofer is used.
-NO: Select this if no subwoofer is used.
WDISTANCE
You can vary the distance of each speaker as follows. The default settings xc unclerlincd,
l
F. D. 5.1 m ( 17 ft) (front speakers distance)
Front speaker distance can be set in 0.3 meters ( I.0 foot) step\ l'rom 0.9 to 15.0 mctcr\ ( 3.0 to
50.0 feet).
l
C. D. 5.1 m (17 ft) (center speaker distance)
Center speaker distance can be set in 0.3 meters (1 .O foot) steps l'ron~ ;I tlixtance equal to the
front speaker distance to a distance I .S meters (5.0 feet) closer to !ollr li\teninf positioll.
l
R. D. 3.6 m ( 12 ft) (rear speakers distance)
Rear speaker distance can be set in 0.3 meters (I .O foot) steps l'ron~ ;I distance cquai IO the
front speaker distance to
;I
distance 4.5 tneters ( IS.0 feet) clobcr IO your li\lening position.
Specifying
the rear speaker position
and height
If you select anything other than "NO" in "R.SP.." specify the poxition
and
height of the
I'GII
speakers. The default settings are underlined.
Position diagram
l
R. P. BEHIND
Select this if the rear speakers are located in the section 0.
l
R. P. SIDE
Select this if the rear speakers are located in the section 0.
26"s
Advertisement
Table of Contents
