Engine control system
ZMU07332
If the alert system has activated, stop the en-
gine and check the cooling water inlets:
Check trim angle to be sure that the cool-
ing water inlet is submerged.
Check the cooling water inlet for clogging.
ZMU07333
Multiple engine drive users:
If the overheat alert system of one engine ac-
tivates, the engine will slow down. To switch
off the alert activation on the engine not af-
ZMU07334
fected by overheating, turn off the main
switch of the engine overheating. If the alert
system has activated, stop the engine and tilt
the outboard motor up to check the cooling
water inlet for clogging. If the alert system
has still activated, tilt the overheated out-
board motor up and return to the port.
EMU42121
Low oil pressure alert
If the oil pressure drops too low, the alert de-
vice will activate.
ZMU07320
The engine speed will automatically de-
ZMU07321
ZMU05826
59