Related Manuals for LG LVC-C513HM
Summary of Contents for LG LVC-C513HM
-
Page 1: Operating Instructions
Operating Instructions LVC-C513HM LVC-C513HP Before installing and using the camera, please read these instructions thorough- ly and retain them for later reference. - Page 2 Warning To prevent fire or shock hazard,do not expose the unit to rain or moisture. CAUTION To avoid electrical shock,do not open the cabinet. Refer servicing to RISK OF ELECTRIC SHOCK qualified personnel only. DO NOT OPEN Wiring methods shall be in accordance with the National Electric Code, ANSI/NFPA 70.
-
Page 3: Table Of Contents
Contents Features....................................3 Cautions for Safe Operation ............................4 Operating Controls and Their Functions........................5 Power IN/CONTROL.................................6 External Key(A/D IN)................................7 MENU DESCRIPTIONS ..............................8 CAMERA ID ..................................9 FOCUS MODE SET ...............................10-11 AWB SET ................................12-13 AE SET ..................................14-16 AE LEVEL ...................................17 SPECIAL SET ................................18-19 MOTION DET ................................20 F OSD SET .................................21 P MASKING ................................22-24 On-Screen Display..............................25-26... -
Page 4: Cautions For Safe Operation
Cautions for Safe Operation Power Supply • Close to generators of powerful electromagnetic This camera must always be operated a 12V DC radiation such as radio or TV transmitters. UL Listed, Class 2 Power Supply only. Care of the unit Handling of the unit •... -
Page 5: Operating Controls And Their Functions
Operating Controls and Their Functions 1. Tripod adapter This adapter can also be attached on the bottom of the camera. 2. Lens mount cap 3. TELE Key When push the TELE KEY, picture is telephoto 4. WIDE Key When push the WIDE KEY, picture is wide angle 5. -
Page 6: Power In/Control
Power In / Control You can adjust focus and zoom by a pin terminal on the back side of the camera. * is the color of the cable. (If it is offered) Adjust voltage from 1 pin and 2 pin... -
Page 7: External Key(A/D In)
External Key (A/D IN) Schematic diagram of wired remote-control LVC-C513'S... -
Page 8: Menu Descriptions
MENU DESCRIPTIONS Using TELE, WIDE, F. NEAR, F. FAR button TELE and WIDE are used for UP and DOWN. • FOCUS+ and FOCUS- are used for INCREASE and DECREASE the data. •... -
Page 9: Camera Id
CAMERA ID 1. CAMERA ID To connect a large number of camera , It can be assigned to identification number to each camera for camera control easily. (OFF, 0 - 255: total numbers of ID are 256) • It only can be set this function using ID commend. To transfer ID Code of camera , In first byte at PC control. -
Page 10: Focus Mode Set
FOCUS MODE SET 2. Focus Set: 2-1. Focus Mode Set This function is for focus mode setting A) Set up “FOCUS SET” in main menu using Tele/Wide key. Select the “FOCUS MODE” in submenu using Tele/Wide key. And then set the mode (Auto, Push auto, or Manual) using Focus key. - Page 11 FOCUS MODE SET 2-4. ZOOM END Set This function is for selection of zoom end position. A) Select the “ZOOM END” in submenu using Tele/Wide key. B) Set the Zoom end mode from (Zoom Start + 1) x 54 to X using Focus key.
-
Page 12: Awb Set
AWB SET (Auto White Balance) 3. AWB SET 3-1. WB Mode Set This function is for changing the WB mode. A) Set up “AWB SET” in main menu using Tele/Wide key. WBC MODE AUTO B) Select the “WB MODE” in submenu using Tele/Wide key. RED ADJUST NOT USE BLUE ADJUST... - Page 13 AWB SET (Auto White Balance) 3-3. BLUE ADJUST Set This function is available for Manual WB mode. This mode is the adjustment of user option for special color. WBC MODE AUTO RED ADJUST NOT USE A) Select the “BLUE ADJUST” in submenu using Tele/Wide key. BLUE ADJUST NOT USE B) Adjust the level from (0-255 MANUAL) using Focus key.
-
Page 14: Ae Set
AE SET (Auto Exposure) 4. AE SET 4-1. AE Mode Set This function is for changing to AE mode. A) Set up “AE SET” in main menu using Tele/Wide key. B) Select the “AE MODE” in submenu using Tele/Wide key. C) Set the mode auto, IRIS MAN, SLOW MAN, SHUTTER MAN, Auto using Focus key. - Page 15 AE SET (Auto Exposure) 4-4. BRIGHTNESS ADJUSTMENT Set This function is available for AUTO mode. A) Select the “BRIGHTNESS” in submenu using Tele/Wide key. B) Adjust the level from 0 to 255 using Focus key. 4-5. BACKLIGHT Set A) Select the “BACKLIGHT” in submenu using Tele/Wide key. B) Set the mode OFF, ON, or AUTO, WDR using Focus key.
- Page 16 This function is available for AUTO mode / SHUTTER mode. A) Select the “SHUTTER” in submenu using Tele/Wide key. B) • Set the mode NORMAL, 1/120 - 1/50000 using Focus key. (LVC-C513HM) • Set the mode NORMAL, 1/125 - 1/50000 using Focus key. (LVC-C513HP) 4-9. INITIAL SET A) Select the “INITIAL SET”...
-
Page 17: Ae Level
AE LEVEL (Auto Exposure) 5-1. BLC LEVEL Set This function is for change to BLC LEVEL. A) Select the “BLC LEVEL” in submenu using Tele/Wide key. B) Adjust the level from 0 to 255 using Focus key. 5-2. WDR LEVEL SET This function is for change to WDR LEVEL. -
Page 18: Special Set
SPECIAL SET 6. SPECIAL SET 6-1. User Title Set This function is for custom title on screen display. A) Set “SPECIAL SET” in main menu using Tele/Wide key. B) Select the “USER TITLE” in submenu using Tele/Wide key. C) Set the position of title and set data using Tele/Wide, Focus key. -
Page 19: Special Set
SPECIAL SET 6-5. D EFFECT Set This function is to scroll to mirror relevanced function. A) Select the “D EFFECT” in submenu using Tele/Wide key. B) Set the mode, none, mirror, v-flip, rotation using Focus key. 6-6. INITIAL SET If initial mode set to ON, All SPECIAL functions are changed to the factory setting A) Select the “INITIAL SET”... -
Page 20: Motion Det
MOTION DET 7. MOTION DETECTION SET 7-1. DETECTION Mode Set A) Set “MOTION” in main menu using Tele/Wide key. B) Select the “DETECTION” in submenu using Tele/Wide key. C) Set the mode ON, OFF using Focus key. 7-2. LEVEL ADJUST Set This function is available for DETECTION mode. -
Page 21: F Osd Set
F OSD DISP (Function On Screen Display) 8. F OSD DISP 8-1. FUNCTION Set A) Set “F OSD” in main menu using Tele/Wide key. B) Select the mode what you want in submenu using Tele/Wide key. C) Set the display mode of OSD ON, OFF using Tele/Wide, FOCUS key. -
Page 22: P Masking
P MASKING (Privacy Masking) 9. P MASKING 9-1.AREA SEL P MASKING This function is to selecting to privacy masking area. AREA SEL NONE A) Set “P MASKING” in main menu using Tele/Wide key. MASKING B) Select the “AREA SEL” in submenu using Tele/Wide key. P MODE SET MOVE PT SEL NONE... - Page 23 P MASKING (Privacy Masking) 9-5. MOVE PT CNT This function is available to move selected point in the P MASKING MOVE PT SEL. AREA SEL NONE A) When MOVE PT SEL is selected ALL* : Available to move MASKING area. P MODE SET MOVE PT SEL NONE...
- Page 24 P MASKING (Privacy Masking) 9-9. INITIAL SET : A) Select the “INITIAL SET” in submenu using Tele/Wide P MASKING Command, AREA SEL NONE B) Set the initial set mode to ON or OFF using Focus key. MASKING P MODE SET 9-10.
-
Page 25: On-Screen Display
Indicate the camera stand-by during the camera’s power turning ON. 5. CAMERA ID According to write the identification number to each camera, Multi-point control is available (PC Control 000~255). * Shutter Speed 1/120 - 1/50000: LVC-C513HM * Shutter Speed 1/125 - 1/50000: LVC-C513HP... - Page 26 On Screen Display FUNCTION OSD Format Description 6. WBC Mode White Balance AUTO WB Preset for INDOOR (3200°K) Wb Preset for OUTDOOR (5100°K) Manual WB Adjustment: In manual mode the HUE control is available (0 ~ 255). Push Auto White Balance: Turn this mode ON, the white trace automatically.
-
Page 27: Specifications
Specifications Image device 1/4" EXVIEW HAD CCD NTST, High resolution : 811(H) X 508(V) 410K PAL, High resolution : 795 (H) X 596 (V) 470K Approx.480 Line (NTSC, High resolution) Horizontal resolution 470 Line (PAL, High resolution) (at center of screen) Lens X 27 Zoom (F 1.5 (W), F 3.8 (T) f= 3.25 ~ 88.0 mm), Video AF Digital Zoom Ratio... - Page 28 Specifications Focal Length 3.24mm (WIDE), 86mm (TELE) OSD(On Screen Display) English Power requirement 12V DC UL Listed, Class 2 Power Supply Only (Refer to bottom panel) Video output Composite Output 75Ω Terminated / Y,C Separated Power consumption 5.1W (Refer to bottom panel) operating temperature 0°C - 45°C Operating Humidity...
- Page 29 P/NO: 3834RS0071N...