Brother MFC-8510DN Basic User's Manual page 54

Chapter 8
e
If you want to save a fax resolution along
with the number, do one of the following:
 To store the fax resolution, press
a or b to choose Std, Fine, S.Fine
or Photo.
Press OK.
 Press OK if you don't want to change
the default resolution.
If you have downloaded the IFAX and
E-mail options
If you have installed the IFAX and E-mail
options to your machine, use this procedure
to store the Speed Dial numbers.
a
Press (Address Book) twice and
enter a three-digit Speed Dial location
number (001-300).
If a number or E-mail address is not
stored there, the LCD shows
Register Now?
Press 1 to choose Yes.
b
Press a or b to choose one of the
following:
Fax/Tel
IFAX
Email Color PDF
Email Color JPG
Email Color XPS
Email Gray PDF
Email Gray JPG
Email Gray XPS
Email B&W PDF
Email B&W TIFF
Press OK.
46
c
Enter the fax/telephone number (up to
20 characters each) or E-mail address
(up to 60 characters each). For help
entering characters, see Entering text
uu page 151.
Press OK.
Note
• If you selected an E-Mail Registration
Type in step b and saved an E-mail
address in step c, you can only use the
E-mail address when you are in SCAN
mode.
8
• If you selected the IFAX Registration Type
in step b and saved an E-mail address in
step c, you can only use the E-mail
address when you are in FAX mode.
d
Do one of the following:
 Enter the name using the dial pad
(up to 10 characters for Chinese or
20 characters for alphanumeric). For
help entering characters, see
Entering text uu page 151.
Press OK.
 Press OK to store the number or
E-mail address without a name.
e
If you want to change the pinyin, you can
change it using the dial pad.