Brother MFC-J2510 Basic User's Manual page 120

Error Message
Document Cover Open
(MFC-J4710DW)
Document Jam/too Long The document was not inserted or fed
DR Mode in Use
(For Australia, Singapore
and Hong Kong)
FaxAbility On
(For New Zealand)
High Temperature
Hub is Unusable.
Image Too Long
Image Too Small
110
Cause
The document cover was open while
scanning a 2-sided document using
the ADF.
correctly, or the document scanned
from the ADF was too long.
(For Australia, Singapore and Hong
Kong)
The machine is in Distinctive Ring
mode. You cannot change the
Receive Mode from Manual to
another mode.
(For New Zealand)
The machine is in FaxAbility mode.
You cannot change the Receive
Mode from Manual to another mode.
The print head is too warm.
A hub or USB Flash memory drive
with hub has been connected to the
USB direct interface.
The proportions of your photo are
irregular so effects could not be
added.
The size of your photo is too small to
trim.
Action
Close the document cover.
(See Using the ADF on page 47.)
(See Document jam on page 118.)
(For Australia, Singapore and Hong
Kong)
Set Distinctive Ring to Off.
(See Turning off Distinctive Ring
on page 64 and 69.)
(For New Zealand)
Set FaxAbility to Off.
(See How to Turn FaxAbility OFF or
ON on page 67.)
Allow the machine to cool down.
Hubs, including USB Flash memory
drives that have a hub built in, are not
supported. Unplug the device from
the USB direct interface.
Choose a regularly proportioned
image.
Choose a larger image.