USB
Hardware
initialization
Software
initialization
Transparency Unit
Electrical Specifications:
Supplied voltage:
Rated current:
Environmental Conditions:
Temperature:
Operation
Storage
Humidity:
Operation
Storage
Reliability:
Document:
Transparencies
A-8
Technical Specifications
The scanner is turned on.
The USB cable is unplugged from the USB port on the
scanner.
Software sends the ESC @ (initialize the scanner)
command.
The scanner receives a Bus Reset from the USB
interface.
DC 21.6 to 26.4 V
0.6 A
5° C to 35° C
-20° C to 60° C
10% to 80%, without condensation
10% to 85%, without condensation
100,000 cycles for the MCBF
up to 8.5 × 11.7 cm
35-mm film strips
35-mm slides
120/220 (6 × 9 cm) film strips
4 × 5 inch film
DC 4.75 to 5.25 V
0.1 A