Toro 1800 Power Curve Operator's Manual page 5

1. Decal
4. Ensure that the handle of the chute control rod points upward
(Figure 6), and insert the rod into the keyed hole in the back of
the housing.
1. Handle on the chute control rod
5. Firmly push the rod into the keyed hole in the back of the housing
until it snaps into place.
6. Move the handle on the chute control rod to ensure that it moves in
the same direction as the chute (Figure 7).
Figure 5
2. Keyed hole
Figure 6
5
Meijer.com
Figure 7