Using Voice Recognition; Using The Flash Feature; Making Conference Calls - Panasonic DBS 576 User Manual

Supports dbs 576 and dbs 576hd version 4.0, section 750 key phone
Hide thumbs Also See for DBS 576:
Table of Contents

Advertisement

USING VOICE RECOGNITION

With the installation of additional hardware, you can use verbal commands to dial
extensions, speed dial numbers, and access various phone features.
Note: This feature requires system programming and addition hardware (VB-44224
Telephone and VM-44101 Voice Recognition Adaptor). For more information, see
your system administrator or dealer.

USING THE FLASH FEATURE

You can send a signal to your phone to release an outside line by pressing the
FLASH key or the PROG key. Once you press either key, your phone will either
reseize the same outside line or switch to extension dial tone status.
Note: This feature requires system programming. For more information, see your
system administrator or dealer.

MAKING CONFERENCE CALLS

You can use your phone to create conference calls that include up to three parties.
(With the installation of an optional 8-party conference card, you can include up to
eight parties.)
Notes:
• When no optional conference card is installed, the System supports the
following types of 3-party conference calls:
•3 extensions
•2 extensions and 1 outside line
•1 extension and 2 outside lines
• When the optional 8-party conference card is installed, the System supports
any combination of conference calls, except all outside lines.
The Version 2.0 software release allows any combination of extensions and CO
lines be in the conference as long as the original extension is in the conference and
the total number of parties does not exceed 8. With Version 2.0 software, only one
operation is used to establish and add to a conference. You simply have to place the
current call on hold, dial the next party and press the CONF key. No different
operation or access code is required to add additional parties to the call.
To establish a conference call
1. While on a call, press the HOLD key or the outside line key you are using.
2. If adding an outside party, press a vacant CO key or dial a trunk access code.
576-40-750
DBS 576 issued March 2001
6. Using Additional Features
83

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dbs 576hd

Table of Contents