Startup problems
Initialization error codes
Note: If the unit fails
to perform the
initialization
sequence, it may need
to be repaired. In this
case contact your
supplier for support.
Startup problems
This section gives advice on troubleshooting
problems during initialization (startup).
If the initialization procedure fails an error
code should be displayed on the
the
LED will remain on.
alert
The code should be read from left to right. To
identify the code write down each LED as a '1'
or '0' depending on its state (on = 1).
For example the pattern:
on on off off on off
would be written:
110010
The following table shows the meaning of the
initialization error codes.
LEDs and
info
177