Specifications; Power Output And Total Harmonic Distortion - Sony STR-DB1070 Operating Instructions Manual

Troubleshooting (continued)
Reference sections for clearing the
receiver's memory
To clear See
All
memorized settings page 18
Customized sound fields naae 37
,..
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 8 ohm loads, both channels driven, from
20 - 20,000 Hz; rated 100 watts per channel
minimum RMS power, with no more than
0.09 % total harmonic distortion from 250
milliwatts to rated
output
(Models of area code
U only).
Amplifier section
POWER OUTPUT
Models of area code U, CA
Rated Power Output at Stereo Mode
(8
ohms 20 Hz - 20 kHz, THD 0.09 %)
1OOw+1oow
(4 ohms 20 Hz - 20 kHz, THD 0.09 %)
9nw+9nw
Reference Power Outp&
(8 ohms 20 Hz - 20 kHz, THD 0.09 %)
STR-DB 1070: FRONT? 100 W + 100 W
CENTER? 100 W
SURR? 100 W + 100 W
SURR BACK? 100 W
STR-DB870: FRONT? 100 W + 100 W
CENTER? 100 W
SURR? 100 w + 100 w
(4 ohms 20 Hz -
STR-DB 1070:
20 kHz. THD 0.09 %)
FRONT&OW+90W
CENTER? 90 W
SURR? 90 w + 90 w
SURR BACK? 90 W
STR-DB870: FRONT?90 W + 90 W
CENTER? 90 W
SURR? 90 w + 90 w
Models of other area code
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7 %)
STR-DB 1070: 100 w + 100 WZ'
9OW+9OW"
STR-DB870: 100 w + 100 W2'
(4 ohms 1 kHz, THD 0.7 %)
STR-DB1070: 9ow+9ow*)
8OW+SOW)'
STR-DB870: 100 w + 100 WZ'
Reference Power OutpuV
(8 ohms 1 IcHz, THD 0.7 %)
STR-DB1070: FRONT? 100 W + 100 W
CENTER? 100 W
SURR? 100 W + 100 W
SURR BACK": 100 W
STR-DB870:
FRONT? 100 W + 100 W
CENTER? 100 W
SURR? 100 W + 100 W
(4 ohms 1 kHz.
STR-DB
THD 0.7 %)
1070: FRONT? 90 w + 90 w
CENTER? 90 W
SURR": 90 W + 90 W
SURR BACK": 90 W
STR-DB870:
FRONT? 100 W + 100 W
CENTER? 100 W
SURR? 100 w + 100 w
(8 ohms 20 Hz - 20 kHz, THD 0.09 %)
STR-DB 1070: FRONT? 90 W + 90 W
CENTER? 90 W
SURR? 90 w + 90 w
SURR BACK? 90 W
SIR-DB870: FRONT? 90 W + 90 W
CENTER? 90 W
SURR? 90 W + 90 W
(4 ohms 20 Hz - 20 kHz, THD 0.09 %)
STR-DB 1070:
FRONT? 80 W + 80 W
CENTER? 80 W
SURR? 80 W + 80 W
SURR BACK": 80 W
STR-DB870: FRONT? 90 W + 90 W
CENTER? 90 W
SURR? 90 W + 90 W
1) Depending on the sound field settings and the
source, there may be no sound output.
2) Measured under the following conditions:
Area code Power requirements
E
CN, SP, CEL
240 V AC, 50 Hz
230 V AC, 50 Hz
l-w
llOVAC,60Hz
3) Measured under the following conditions:
Area code Power requirements
CN
220 V AC, 50 Hz