Reversing The Door Handles - GE CustomStyle Profile Performance 22 Owner's Manual

Reversing the door handles.

Read these instructions completely and carefully.
Transfer Fresh Food Door Handle
Remove the handle plug using a knife or putty knife with the end wrapped in masking tape under the
1
edge. Remove the screw underneath, using a Phillips screwdriver.
Remove the two screws holding the handle to the top of the door. Pull the top of the handle away from
2
the door, unhook the bottom bracket from the door, and place the assembly aside.
Remove the foam hole plug from the bottom of the door and plug buttons, and transfer them
3
to the corresponding locations on the opposite side of the door.
Hook the handle on the bottom of the right side of the door.
4
Screw the handle back into place with the two top screws, the middle screw, and the bottom screw.
5
Reinsert the plug button.
26
Short Handle
Handle Plug
Plug Button
Handle Holes
To reattach the handle on
the opposite side.
Hole
Pin
Screws for
Medallion
Long Handle
Handle Plug