Table of Contents
Advertisement
Specifications
General
Rated Power Supply:
Rated Input:
Operating Temperature:
Relative Humidity:
Altitude:
Dimensions:
Weight:
Control terminals
CONT IN
CONT OUT
GND (Ground)
TEMP ALM
FAN ALM
EXTERNAL CONTROL:
When set to ON:
When set to OFF:
Serial bus terminal
Serial bus terminal (2 terminals)
Accessories:
Control input/output terminals and circuits
TEMP ALM terminal
FAN ALM terminal
• Output Circuit
GND terminal
<Interface circuit inside the unit>
Design and specifications are subject to change without notice.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
18
100 to 240 V AC ±10 %, 50/60 Hz
0.7 - 0.4 A (100-240 V)
41 °F-104 °F (5 °C to 40 °C)
Max. 80 (%)
Max. 2000 (m)
424 (Width) x 361 (Depth) x 49 (Height) (mm)
5 kg
Input terminal working with the power supply of the recorder
Output terminal working with the power supply of the recorder
For grounding
Output terminal for detecting abnormality of temperature (open collector output)
Active:
Non active:
Output terminal for detecting abnormality of the fan (open collector output)
Active:
Non active:
Power is supplied to the HDD when 12V of voltage is applied to the input terminal working with
the power supply
Power is always supplied to the HDD.
(Only DX-ZD5UE(Z) is connectable.)
USB2.0 cable
Screws
User's manual (this manual)
Power cord
Output terminal
"Low" Level
Max. Drive current 7 mA DC.
Open.
Max. Voltage 24 V DC.
"Low" Level
Max. Drive current 7 mA DC.
Open.
Max. Voltage 24 V DC.
1
8
1
3
Advertisement
Table of Contents
