Connecting The Appliance; Getting To Know Your Appliance - Bosch KSR Operating Instructions Manual

Connecting
the appliance
After installing the appliance, wait at least
1 hour until the appliance starts up.
During transportation the oil in the
compressor may have flowed into the
refrigeration system.
Before switching on the appliance for
the first time, clean the interior of the
appliance (see chapter Cleaning).
The socket should be freely accessible.
Connect the appliance only to
220 240 V/50 Hz alternating current via
a correctly installed earthed socket.
The socket must be fused with a 10 A
to 16 A fuse.
If the appliance is to be operated in
a non European country, check on
the rating plate whether the indicated
voltage and current type correspond
to the values of your mains supply.
The rating plate is situated in the bottom
left hand side of the appliance. The power
cord may be replaced by a technician
only.
Warning
!
Never connect the appliance to electronic
energy saver plugs or to power inverters
which convert the direct current to 230 V
alternating current (e.g. solar equipment,
power supplies on ships).
Getting to know your
appliance
Please fold out the illustrated last page.
These operating instructions refer to
several models.
The diagrams may differ.
Fig. 1
* not all models
1 4 Fascia
5 Light switch
6 Interior light
7 Shelf in the refrigerator
compartment
8 Fruit container *
9 Vegetable container
10 Egg rack *
11 Butter and cheese compartment *
12 Shelf for tubes and small tins
13 Shelf for large bottles
en
5