Page 3
..............42 Reference section Troubleshooting ............43 Symptom and solution ........43 Symptom and solution - digital only - ....43 Specifications ............45 Information License Information used with Toshiba Televisions .............. 46 Exhibit A ..............47 Exhibit B ..............47...
Never block or cover the slots and openings in the cabinet. • Never place the TV so that it is facing upward or • Thank you for purchasing this Toshiba LCD Colour on its side. television. This manual will help you use the exciting •...
Introduction Always place the TV on the floor or a sturdy, level, stable surface that can support the weight of the Never place hot objects or open flame sources, unit. such as lighted candles or nightlights, on or For model 26SL700A / 32SL700A / 42SL700A: close to the TV.
Introduction Service When the TV will not be used for a long period of time, such as during vacation or travel, remove Never repair, modify or disassemble the TV by the power plug from the wall outlet for safety. yourself. •...
This is not a sign of malfunction. Exemptions • Toshiba is not liable for any damage caused by fires, natural disaster (such as thunder, earthquake, etc.), Important information acts by third parties, accidents, owner's misuse, or uses in other improper conditions.
You can operate your TV using the buttons on the TV control panel or the remote control. The back and side of the page 36 Connecting your TV) panel provide the terminal connections to connect other equipment to your TV. ( 22SL700A Power Programme up...
Page 10
Getting started 42SL700A VIDEO INPUT MONO Video Headphone HDMI 3 IR SENSOR GREEN LED - RED LED - Standby TOUCH SENSOR On Timer/EPG Timer On BLUE LED - Power on Standard (composite) video and Press to turn the TV on or AV terminal standard audio inputs.
Getting started TV back panel connections Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket. 22SL700A AC IN LOCK UNLOCK 26SL700A / 32SL700A AC IN...
Page 12
Getting started 42SL700A AC IN HDMI input terminals — High-Definition Multimedia Interface input receives digital audio and uncompressed digital video from an HDMI device or uncompressed digital video from a DVI device. page 39 Connecting an HDMI or a DVI device) PC input terminal —...
Getting started Learning about the remote control Location of controls Simple at-a-glance reference of your remote control. For On/Standby mode To select input from external sources Still Picture To call up Teletext services To turn the subtitle On/Off Stereo/Bilingual transmissions Number buttons To return to the previous programme To toggle between ATV and DTV mode...
Getting started Learning about the menu system PREFERENCES menu We suggest you familiarize yourself with the display charts before using the menu system: PREFERENCES PREFERENCES REGZA-LINK Setup REGZA-LINK Setup Teletext Teletext • Press to display menu, then press ◄ or ► to Subtitle Subtitle Audio Channel...
Getting started Turning on the TV Initial Setup Engrgy Saving Mode To use this TV for displaying Home in a store showroom, please Store select [Store]. Switching on the TV [Home] mode is recommended for normal use. Connect the power cord to a wall outlet, the power indicator lights in red (standby mode).
Getting started Setting the programmes 4. Select Auto Scan and press ► or Note: When the Channel Block is activated, a 4-digit Channels password is needed to enter the Channels submenu Auto Scan under SETUP menu. Update Scan Single RF Scan Channel Skip Auto Scan Channel Sort...
Getting started Single RF Scan 4. Use number buttons 0~9 to enter the Start Frequency. Press ▲ or ▼ to select Scan Up or Scan Scan single RF channel. You can check the Signal RETURN Down. Press ► or to start scanning. Press Strength and the Signal Quality.
Getting started Channel Sort 4. Press ◄ or ► to adjust the frequency. Press ◄ to decrease and ► to increase the frequency. Change the order of the programme list. 1. Select Channels from the SETUP menu. Analogue Channel Fine Tune 2.
Getting started Quick Access Menu General Control Quick access menu helps you access some options quickly, such as Picture Mode, Picture Size, Sleep, Selecting programme positions REGZA-LINK, and Media Player. Press QUICK button to display the Quick access menu and press ▲ or ▼ to After you have tuned the TV, you have several ways to select the option.
Using the TV's features (General) Using the TV’s features (General) Picture Control Widescreen viewing This setting is available when Native watching video signal source via HDMI, and will show the picture without over scan. Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when available).
Page 21
Using the TV’s features (General) Use this setting when watching a 14:9 14:9 broadcast. Use this setting for PC connected via HDMI or RGB/PC terminal when receiving PC Wide PC signal format. This setting will display the image without picture clipping. Use this setting for PC connected via HDMI or RGB/PC terminal when receiving PC Normal...
Using the TV’s features (General) Still Picture the picture. The picture shows the clear edge when you increase the values. • Press to freeze the picture. 1. In the PICTURE menu, press ▲ or ▼ to select Even if an image is frozen on the TV screen, the pictures Sharpness.
Using the TV’s features (General) Cinema Mode MPEG NR The frame rate of a movie film is generally 24 frames a If the receiving signal of MPEG is a grained noise second whereas the movie software such as DVD, etc. depending on the compression and conversion, the noise that you enjoy watching on television at home is 30 or may be reduced when using this function.
Using the TV’s features (General) Blue Screen per second, virtually eliminating motion blur without adding flicker or reducing image brightness. When Blue Screen is selected, the screen will turn blue and the sound will be muted when no signal is received. 1.
Using the TV’s features (General) ® HDMI RGB Range Stable Sound Adjusts RGB full range signal automatically. The option Stable Sound reduces the volume level differences Limit adjusts the RGB signal output range from 16 to between channels. It automatically remains on the same 235.
Using the TV’s features (General) HDMI1 Audio 2. Press to select the Auto/Mono mode. Stereo and Mono appear cyclically on the screen. If the connected HDMI source does not support digital audio, plug the audio cable into PC/HDMI1 (Audio) on Selecting the bilingual programmes the back of the TV, then use the HDMI1 Audio setting.
Date and Time manually by using ▲, ▼, ◄, stored external equipment. Use ▲ and ▼to highlight ►, and number buttons. to select. 5. Using ▲, ▼, ◄ and ► to select the Power On/Off Timer. 22SL700A: 26/32SL700A: Main Main Time Auto Synchronization...
REGZA-LINK compatible equipment. Press ▼ to highlight the input source shown with the This feature uses CEC (Consumer Electronics Control) REGZA-LINK icon. technology, and allows the control of Toshiba REGZA- Main LINK compatible equipment from the television’s remote control.
Using the TV’s features (General) 2. Press the key on the television’s remote control as widescreen formats and picture preferences when guided by the control panel shown. connected to a REGZA-LINK PC. Note: The available functions are dependent on the Note: This feature is dependent on the connected connected equipment, not all the remote functions equipment.
Using the TV’s features (General) Amplifier Control Media Player Photo When the Amplifier Control is enabled, REGZALINK Music allows some of the amplifier features to be controlled with the television remote control. Note 1: The Media Player will open even if there are no images on the USB flash drive.
Using the TV’s features (General) Playing Photo Slideshow show the next page moving the highlight to the top left file. This view mode displays all the images in a selected If there is more than one page of images within the folder as a slideshow, scrolling through them folder pressing P and P...
Using the TV’s features (General) Digital Subtitle 2. Use ◄ or ► to select On or Off. 4:3 Stretch Use the Digital Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a If the 4:3 Stretch is On, the picture size will auto stretch selected language is not broadcast, the default language to 4:3 aspect ratio in Widescreen format.
Using the TV’s features (General) the broadcasting station.Therefore if the signal has no information, this function does not operate. SETUP 1. Highlight the Parental in the SETUP menu, and OSD Language English Channels press ► or to select. Automatic Power Down Location Home 2.
Using the TV’s features (General) 4. Use ▲ or ▼ to highlight the input that you want to 3. Use ▲ or ▼ to highlight the Panel Lock and press ◄ or ► to switch the function On or Off. disable and press to lock.
Using the TV’s features (General) Text Information 2. The indicator will be shown in the detail information area if timer function is set. The first text page shown will be the index page. 3. Press BLUE button to enter the programme timer Any text page can be accessed by entering the 3 digit list page.
• DO NOT connect the DIGITAL AUDIO output TV back view terminal to the AC-3 RF input of a Dolby Digital 22SL700A Receiver with a built-in Dolby Digital decoder. • Connect the DIGITAL AUDIO output terminal to the Optical or Coaxial input of a Receiver or Processor.
Connecting your TV Connecting an amplifier equipped Connecting an amplifier equipped with a Dolby Digital decoder with an MPEG decoder Amplifier equipped with Amplifier equipped with Dolby Digital decoder MPEG decoder To Optical Type To Optical Type digital audio input digital audio input Optical digital cable Optical digital cable...
Connecting your TV Connecting an amplifier equipped Side Connections with a digital audio (optical or Connection example: coaxial) input 26SL700A 22SL700A 32SL700A/42SL700A Amplifier equipped with TV side view digital audio input decoder DVD video player To Optical Type (with composite video outputs)
Connecting your TV Connecting an HDMI device Connecting an HDMI or a DVI device One HDMI cable (type A connector) TV back view • When turning on your electronic components, turn on HDMI 1/2 the TV first, and then the HDMI or DVI device. •...
HDMI standard. This feature is REGZA-LINK Connections limited to models incorporating Toshiba’s REGZA- LINK. However,Toshiba is not liable for those operations. Refer to individual instruction manuals for The basic functions of connected audio/video equipment compatibility information.
Connecting your TV scenes may be skipped, or you may not be able to pause during multi-angle scenes. Signal names for mini D-sub 15 pin connector Pin assignment for RGB/PC terminal Pin No. Signal name Pin No. Signal name VGA-5V Ground NC (not connected) NC (not connected)
Connecting your TV Acceptable Video signals through HDMI terminals Format Resolution V. Frequency H. Frequency Pixel Clock Frequency 480i 720 x 480i 60.000Hz 15.734kHz 27.000MHz 480p 720 x 480p 60.000Hz 31.500kHz 27.000MHz / 27.030MHz 576i 720 x 576i 50.000Hz 15.625kHz 27.000MHz 576p 720 x 576p...
Reference section Troubleshooting Some pixels of the screen do not light up • The LCD display panel is manufactured using an extremely high level of precision technology, Before calling a service technician, please check the however, sometimes some pixels of the screen following table for a possible cause of the symptom and may be missing picture elements or have luminous some solutions.
Page 44
Reference section Cannot lock signal by using Manual Scan • Check the frequency that you have entered is exactly the Middle frequency of the wanted channel. • Refer to the solutions for “Poor picture”. No Teletext, no Subtitle • Make sure the channel that you are watching carries Teletext/Subtitle information from Cannot receive channels after moving the TV between cities (e.g.
TOSHIBA. These software and accompanied documents are copyrighted by TOSHIBA, and protected by Copyright Act, an international treaty's articles and other governing laws. The software components which are made or developed originally by TOSHIBA and not subject to EULAs are not a target of source code offering.