Connecting To Optional Equipment; Connections - Silvercrest DC-5900 Owner's Manual

Connections (Cont'd)

Connecting to Optional Equipment

Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic II/Pro
Logic
Connect the Left and Right AUDIO OUT jacks on this
unit to the audio left and right in jacks on your amplifier,
receiver or stereo system, using the audio cables.
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby Digital™, MPEG 2 or DTS)
Connect this unit's DIGITAL AUDIO OUT jack
1 1
(COAXIAL) to the corresponding in jack on your
amplifier. Use an optional coaxial audio cable.
You will need to activate this unit's digital output.
2 2
(See "Digital Audio Output" on page 18).
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your unit (MPEG 2, Dolby
Digital and DTS). Check the receiver manual and the
logos on the front of the receiver.
Warning:
Due to the DTS Licensing agreement, the digital output
will be in DTS digital out when DTS audio stream is
selected.
AERIAL
RF.OUT
DVD/VCR
OUT
10
DVD
EXCLUSIVE VCR IN+OUT/DVD OUT
OUT
DVD/VCR
AUDIO
AUDIO OUT
OUT
R
R
EURO AV2
DECODER
EURO AV1
L
L
AUDIO/VIDEO
COAXIAL
Pro Logic II/Pro Logic
Notes
– If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
– To see the audio format of the current DVD in the On-
Screen Display, press AUDIO.