Convection Bake Element And Fan Assembly - GE ZEK957 Series Technical Service Manual

Convection Bake Element and
Fan Assembly
The convection bake element and fan assembly
are located on the back wall of the oven liner
behind the panel with the screen in the center.
To access convection bake element:
1. Disconnect the power to range; remove the
oven door and the oven racks.
2. Remove 4 screws from the mounting panel (2
on each side) and pull forward.
To remove convection bake element:
Remove 3 screws mounting the element to the
back wall and pull forward. Disconnect the wires.
To service fan:
Note: Convection fan blade nut has left-handed
threads.
Fan blade can be replaced from inside oven.
Oven must be removed from installation to access
convection fan motor.
INSULATION
OVEN
LINER
FAN
BLADE
NUT
SCREWS
(4)
– 28 –
CONV.
OUTER
FAN
BACK
MTG.
PANEL
SCREWS
OVEN
LINER
MOUNTING
FAN SCREWS
(3)
BLADE
(3)
CONV.
FAN
COLLAR
MTG.
SHAFT