Connecting Equipment - Acer AT1916D User Manual

CONNECTING EQUIPMENT

Coaxial (RF)
Using Your Antenna or Digital Cable for
DTV
.
1. Turn off the TV.
2. Connect the coaxial (RF) connector from
your antenna or digital cable (out-of-the-
wall, not from the Cable Box) to the TV
ANTENNA connector.
3. Turn on the TV.
4. Select ATV/DTV using the SOURCE button
on the remote control or the control key
on the side of the TV.
Using Your Antenna or Cable for DTV
1. Turn off the TV.
2. Connect the coaxial (RF) connector from
your antenna or cable (out-of-the-wall, not
from the Cable Box) to the TV ANTENNA
connector at the rear of the TV
3. Turn on the TV.
4. Select ATV/DTV using the SOURCE button
on the remote control or the control key
on the side of the TV.
Using the Antenna or Cable for your
VCR
1. Turn off the TV and VCR.
2. Connect the "Output to TV", "RF Out" or
"Antenna Out" connector on the rear of
your VCR to the TV ANTENNA connector
at the rear of the TV.
3. Turn on the TV and VCR.
4. Select ATV/DTV using the SOURCE button
on the remote control or the control key
on the side of the TV.
NOTE
 If you have an off-air antenna or cable TV,
connect it to the "Antenna In" connector
on the rear of your VCR.
.
13