Changing The Screen Settings; About The Dvd-Player - AEG CTV 4952 LCD/DVD/DVB-T Instruction Manual

English
50

Changing the Screen Settings


Press the MODE button (Fig. 2/10) and choose between the picture
and sound menu using the (/) cursor buttons (Fig. 2/9).
 Switch to the menu you want by pressing the  cursor button.

Use the (/) cursor buttons (Fig. 2/9) to select the option. Make
the adjustments with the cursor buttons (/).

To return to the previous menu or to exit the menu, press the MODE
button (Fig. 2/10).
SYSTEM
In the "System" menu you can set the brightness, contrast, colour satu-
ration, sharpness, OSD language and picture mode.
SOUND
Here you can set the volume.

About the DVD-Player

With this DVD-Player you can play a vast variety of DVD-formats
➯ Page 41, „Technical data".
However, you must be aware that in many cases DVDs are encrypted
with a so-called "Regional Code". This specifies for which region in
the world the DVD is intended. As an example, the DVDs marked with
regional code "1" are intended for the USA and Canada. DVDs with
regional code "2" are for use in Europe.

NOTE:
With your DVD-Player you can only play DVDs with regional code "2".
There are both lots of burning and compressing methods as well as
high quality differences in (burned) CDs/DVDs. Moreover, the music
industry has not yet agreed on a fixed standard for copy protection.
This may, in very isolated cases, result in problems when relaying CDs,
DVDs and MP3 CDs. This is no malfunction of the player.
Furthermore, there may be isolated problems when playing CDs or DVDs
which were created on a PC (e.g. holiday photographs). In case of prob-
lems check the settings of the DVD writing program on your computer.
You should in particular make sure that the DVD has been finalized. For
further information on this matter please refer to the operating manual
of your recorder.
Input Not Possible
If a function or input selected by you is not possible, the adjacent sym-
bol is shown on the screen.