3.12. Heater
1. Remove the "Faston" terminal from the heater.
2. Raise the two claws of the ground plate up with the flat-
blade screwdriver.
3. On the outside of the heater case, detach the three claws
that secure heater bobbin B.
4. Remove the screw securing heater bobbin A inside the
heater case Ass'y.
5. Pull the heater out of the heater case Ass'y.
No.
1
Flat-blade screwdriver
2
Heater bobbin B
3
Ground plate
4
Claw
5
Angle Unit
6
Heater case Ass'y
No.
1
Heater case Ass'y
2
Heater
3
Angle Unit
4
Heater bobbin B
5
Screw
6
Heater bobbin A
Caution:
Before attaching the ground plate to the heater, restore
the connector to its original shape so that it will firmly
attach to the heater.
17
Fig.18
Parts Name
Fig.19
Parts Name
SD-253