Mitsubishi Electric City Multi PKFY-P06NAMU-E Technical & Service Manual
  1. Manuals
  2. Brands
  3. Mitsubishi Electric Manuals
  4. Air Conditioner
  5. City Multi PKFY-P06NAMU-E
  6. Technical & service manual

Mitsubishi Electric City Multi PKFY-P06NAMU-E Technical & Service Manual

Split-type, heat pump air conditioners
Hide thumbs
Table of Contents

Advertisement

Quick Links

SPLIT-TYPE, HEAT PUMP AIR CONDITIONERS
TECHNICAL & SERVICE MANUAL
PKFY-P06NAMU-E
[Models]
REVISED EDITION-C
R410A / R22
• "12. RoHS PARTS LIST" has
been modified.
• Please void OC342
REVISED EDITION-B.
NOTE:
• This manual describes only
service data of the indoor
units.
• RoHS compliant products have
<G> mark on the spec name
plate.
• For servicing of RoHS compli-
ant products, refer to the RoHS
PARTS LIST.
CONTENTS
1. DIFFERENCES ..................................... 2
2. FEATURES ............................................ 3
4. SPECIFICATION ................................... 9
6. WIRING DIAGRAM ............................. 20
9. TROUBLESHOOTING ........................ 30
11. PARTS LIST ........................................ 48
12. RoHS PARTS LIST ............................. 56
May 2009
No. OC342

Advertisement

Table of Contents
loading

Related Manuals for Mitsubishi Electric City Multi PKFY-P06NAMU-E

Summary of Contents for Mitsubishi Electric City Multi PKFY-P06NAMU-E

  • Page 1: Table Of Contents

    SPLIT-TYPE, HEAT PUMP AIR CONDITIONERS May 2009 No. OC342 REVISED EDITION-C TECHNICAL & SERVICE MANUAL R410A / R22 PKFY-P06NAMU-E [Models] Revision: • "12. RoHS PARTS LIST" has PKFY-P08NAMU-E been modified. PKFY-P12NGMU-E • Please void OC342 REVISED EDITION-B. PKFY-P15NGMU-E NOTE: • This manual describes only...

  • Page 2: Revision

    Revision : "12. RoHS PARTS LIST" has been modifi ed on page 61. Page Revise point Service Ref. All parts PKFY-P18/24/30NFMU-E No. 1~9 DIFFERENCES PKFY-P12NGMU-E PKFY-P06NAMU-E PKFY-P15NGMU-E PKFY-P08NAMU-E Indoor Unit Indoor Unit PKFY-P18NFMU-E PKFY-P30NFMU-E PKFY-P24NFMU-E Indoor Unit Indoor Unit Differences among the models of PKFY series.

  • Page 3: Features

    FEATURES PKFY-P06NAMU-E PKFY-P08NAMU-E Indoor Unit Model Cooling capacity / Heating capacity PKFY-P06NAMU-E 6,000 / 6,700 Btu/h PKFY-P08NAMU-E 8,000 / 9,000 Btu/h 1. Compact Design • Compact 11-5/8 inch (29.5cm) high body fits snugly in even limited spaces. • Light weight 19lbs (8.5kg) unit easy to transport and install.
  • Page 4 PKFY-P12NGMU-E PKFY-P15NGMU-E Indoor Unit Model Cooling capacity / Heating capacity PKFY-P12NGMU-E 12,000 / 13,500 Btu/h PKFY-P15NGMU-E 15,000 / 17,000 Btu/h 1. Compact Design Units have now been downsized to require minimal wall space. A 20% reduction in width 39 inch (990mm) compared to previous models means that installation is possible in very narrow spaces.
  • Page 5 PKFY-P18NFMU-E PKFY-P24NFMU-E PKFY-P30NFMU-E PKFY-P30NFMU-E Indoor Unit Models Cooling capacity / Heating capacity PKFY-P18NFMU-E 18,000 / 20,000 Btu/h PKFY-P24NFMU-E 24,000 / 27,000 Btu/h PKFY-P30NFMU-E 30,000 / 34,000 Btu/h 1. A further refinement of comfort with noise suppression Remarkably low-noise operation has been achieved through the development of a “near -silent” fan and the design which minimizes air flow resistance.

  • Page 6: Part Names And Functions

    PART NAMES AND FUNCTIONS Indoor Unit Air intake grille Air intake PKFY-P06NAMU-E PKFY-P08NAMU-E Auto vane Filter Air outlet PKFY-P12NGMU-E Filter Air intake grille PKFY-P15NGMU-E Air intake Auto vane Guide vane Air outlet PKFY-P18NFMU-E Removes dust and dirt PKFY-P24NFMU-E Filter Air intake grilles from the intake air.

  • Page 7: Remote Controller

    Remote controller Once the operation of the unit is set, subsequent operations can only be performed by pressing the ON/OFF button repeatedly. Operation buttons ON/OFF button Set Temperature buttons Down Fan Speed button Timer Menu button (Monitor/Set button) Filter button (<Enter>...
  • Page 8 Display “Sensor” indication Displayed when the remote controller sensor is used. Day-of-Week For purposes of this explanation, Shows the current day of the week. all parts of the display are shown as lit. During actual operation, only Time/Timer Display the relevant items will be lit. “Locked”...

  • Page 9: Specification

    SPECIFICATIONS 4-1. SPECIFICATIONS PKFY-P06NAMU-E PKFY-P08NAMU-E Item Unit PKFY-P06NAMU-E PKFY-P08NAMU-E Single phase, 208/230V, 60Hz Power source ,V,Hz Cooling capacity Btu/h 6,000 8,000 Heating capacity Btu/h 6,700 9,000 Cooling 0.03 Power Supply Heating 0.03 Cooling 0.15 Starting Current Heating 0.15 — Exterior <munsell symbol>...
  • Page 10 PKFY-P12NGMU-E PKFY-P15NGMU-E Item Unit PKFY-P12NGMU-E PKFY-P15NGMU-E Single phase, 208/230V, 60Hz ,V,Hz Power source Cooling capacity Btu/h 12,000 15,000 Heating capacity Btu/h 13,500 17,000 Cooling 0.07 Input Heating 0.07 Cooling 0.34 Current Heating 0.34 Exterior <munsell symbol> — Plastic , white : <0.70Y 8.59/0.97> Height 13-3/8 Width...
  • Page 11 PKFY-P18NFMU-E PKFY-P24NFMU-E PKFY-P30NFMU-E Item Unit PKFY-P18NFMU-E PKFY-P24NFMU-E PKFY-P30NFMU-E Power source ,V,Hz Single phase, 208V-230V, 60Hz Cooling capacity Btu/h 18,000 24,000 30,000 Heating capacity Btu/h 20,000 27,000 34,000 Cooling 0.09 0.12 Input Heating 0.09 0.12 Cooling 0.44 0.58 Current Heating 0.44 0.58 Exterior <munsell symbol>...
  • Page 12 4-2. ELECTRICAL PARTS SPECIFICATIONS PKFY-P06NAMU-E PKFY-P08NAMU-E Model Symbol PKFY-P06/P08NAMU-E Parts name Room temperature TH21 Resistance 30°F/15.8k , 50°F/9.6k , 70°F/6.0k , 80°F/4.8k , 90°F/3.9k , 100°F/3.2k thermistor TH22 Resistance 30°F/15.8k , 50°F/9.6k , 70°F/6.0k , 80°F/4.8k , 90°F/3.9k , 100°F/3.2k...
  • Page 13 PKFY-P12NGMU-E PKFY-P15NGMU-E Model Symbol PKFY-P12/P15NGMU-E Parts name Room temperature thermistor TH21 Resistance 30°F/15.8kΩ, 50°F/9.6kΩ, 70°F/6.0kΩ, 80°F/4.8kΩ, 90°F/3.9kΩ, 100°F/3.2kΩ Liquid pipe temperature thermistor TH22 Resistance 30°F/15.8kΩ, 50°F/9.6kΩ, 70°F/6.0kΩ, 80°F/4.8kΩ, 90°F/3.9kΩ, 100°F/3.2kΩ Gas pipe temperature thermistor TH23 Resistance 30°F/15.8kΩ, 50°F/9.6kΩ, 70°F/6.0kΩ, 80°F/4.8kΩ, 90°F/3.9kΩ, 100°F/3.2kΩ Fuse FUSE 250V 6A...
  • Page 14 PKFY-P18NFMU-E PKFY-P24NFMU-E PKFY-P30NFMU-E Model Symbol PKFY-P30NFMU-E PKFY-P18/P24NFMU-E Parts name Room temperature thermistor TH21 Resistance 30°F/15.8kΩ, 50°F/9.6kΩ, 70°F/6.0kΩ, 80°F/4.8kΩ, 90°F/3.9kΩ, 100°F/3.2kΩ Liquid pipe temperature thermistor TH22 Resistance 30°F/15.8kΩ, 50°F/9.6kΩ, 70°F/6.0kΩ, 80°F/4.8kΩ, 90°F/3.9kΩ, 100°F/3.2kΩ Gas pipe temperature thermistor TH23 Resistance 30°F/15.8kΩ, 50°F/9.6kΩ, 70°F/6.0kΩ, 80°F/4.8kΩ, 90°F/3.9kΩ, 100°F/3.2kΩ Fuse 250V 6A FUSE...
  • Page 15 Unit Wall 4-3. NOISE CRITERION CURVES 3.3ft Ambient temperature 80°F 3.3ft PKFY-P12NGMU-E PKFY-P06NAMU-E SPL(dB) SPL(dB) NOTCH LINE NOTCH LINE High High PKFY-P08NAMU-E PKFY-P15NGMU-E Medium1 Medium1 Medium2 Medium2 NC-70 NC-70 NC-60 NC-60 NC-50 NC-50 NC-40 NC-40 NC-30 NC-30 APPROXIMATE APPROXIMATE THRESHOLD OF...

  • Page 16: Outlines And Dimensions

    OUTLINES AND DIMENSIONS PKFY-P06NAMU-E Unit : inch(mm) PKFY-P08NAMU-E...
  • Page 17 PKFY-P12NGMU-E Unit : inch(mm) PKFY-P15NGMU-E...
  • Page 18 PKFY-P18NFMU-E Unit : inch(mm) PKFY-P24NFMU-E...
  • Page 19 PKFY-P30NFMU-E Unit : inch(mm)

  • Page 20: Wiring Diagram

    WIRING DIAGRAM PKFY-P06NAMU-E PKFY-P08NAMU-E [ LEGEND ] SYMBOL NAME SYMBOL NAME SYMBOL NAME A. B CIRCUIT BOARD (ADDRESS) P. B INDOOR POWER BOARD LINEAR EXPANSION VALVE SWITCH MODE SELECTION CAPACITOR (FAN MOTOR) FAN MOTOR VOLTAGE SELECTION FAN PHASE CONTROL VANE MOTOR...
  • Page 21 PKFY-P12NGMU-E PKFY-P15NGMU-E PKFY-P18NFMU-E PKFY-P24NFMU-E PKFY-P30NFMU-E [LEGEND] SYMBOL NAME SYMBOL NAME SYMBOL NAME I. B INDOOR CONTROLLER BOARD CAPACITOR (FAN MOTOR) TH23 THERMISTOR PIPE TEMP. DETECION/GAS (32°F/15k , 77°F/5.4k ) CN24 CONNECTOR HEATER LINEAR EXPANSION VALVE CN32 REMOTE SWITCH FAN MOTOR (WITH INNER THERMOSTAT) CIRCUIT BOARD (ADDRESS) A.

  • Page 22: Refrigerant System Diagram

    REFRIGERANT SYSTEM DIAGRAM PKFY-P06NAMU-E PKFY-P08NAMU-E Gas pipe temperature thermistor TH23 Gas pipe Flare Strainer (#100mesh) Liquid pipe temperature thermistor TH22 Liquid pipe Heat exchanger Linear expansion valve Strainer (#100mesh) Refrigerant flow in cooling Room temperature Refrigerant flow in heating thermistor TH21 Service Ref.

  • Page 23: Microprocessor Control

    MICROPROCESSOR CONTROL INDOOR UNIT CONTROL 8-1. COOL OPERATION <How to operate> 1 Press POWER ON/OFF button. TIME SUN MON TUE WED THU FRI SAT TIMER 2 Press the operation MODE button to display COOL. AFTER AFTER ERROR CODE FUNCTION °F°C FILTER °F°C WEEKLY...
  • Page 24 Downward B Downward C Swing appears on the (up/ down vane change) wired remote controller. PKFY-P06NAMU-E and PKFY-P08NAMU-E is not equipped with the swing function. : Horizontal Downward A Downward B Downward C (3) In case of PKFY-P06/P08NAMU-E and PKFY-P12/P15NGMU-E :...

  • Page 25: Dry Operation

    Indoor fan operation controlled depends on the compressor conditions. 2. Fan Dry thermo Fan speed notch [Low] Stop Note: Remote controller setting is not acceptable. Same control as COOL operation 3. Drain pump Except for PKFY-P06NAMU-E PKFY-P08NAMU-E Same control as COOL operation 4. Vane (up/ down vane change)

  • Page 26: Fan Operation

    8-3. FAN OPERATION <How to operate> 1 Press POWER ON/OFF button. TIME SUN MON TUE WED THU FRI SAT TIMER 2 Press the operation MODE button to display FAN. AFTER AFTER ERROR CODE FUNCTION °F°C FILTER °F°C WEEKLY SIMPLE ONLY1Hr. AUTO OFF TEMP.

  • Page 27: Heat Operation

    8-4. HEAT OPERATION <How to operate> 1 Press POWER ON/OFF button. 2 Press the operation MODE button to display HEAT. 3 Press the TEMP. button to set the desired temperature. TIME SUN MON TUE WED THU FRI SAT TIMER AFTER AFTER ERROR CODE NOTE: The set temperature changes 2°F when the...
  • Page 28 From the preceding page Control modes Control details Remarks 2. Fan 2-2. Residual heat exclusion mode This control is same for the model When the condition changes the auxiliary heater ON to OFF without auxiliary heater. (thermoregulating or operation stop, etc), the indoor fan operates in [Low] mode for 1 minute.
  • Page 29 8-5. AUTO OPERATION [AUTOMATIC COOL/HEAT CHANGE OVER OPERATION] <How to operate> 1 Press POWER ON/OFF button. 2 Press the operation MODE button to display AUTO. TIME SUN MON TUE WED THU FRI SAT TIMER AFTER AFTER ERROR CODE FUNCTION 3 Press the TEMP. button to set the desired temperature. °F°C FILTER °F°C...

  • Page 30: Troubleshooting

    TROUBLESHOOTING 9-1. HOW TO CHECK PKFY-P06NAMU-E PKFY-P08NAMU-E Part Name Check points Room temperature Disconnect the connector, then measure the resistance using a tester. thermistor(TH21) (Surrounding temperature 50˚F~86˚F) Liquid pipe temperature thermistor(TH22) Normal Abnormal Gas pipe temperature 4.3k ~9.6k Open or short...

  • Page 31: Pkfy-P12Ngmu-E

    PKFY-P12NGMU-E PKFY-P15NGMU-E Parts name Check points Room temperature Disconnect the connector then measure the resistance using a tester. thermistor (TH21) (Surrounding temperature 50 F~86 F) Liquid pipe temperature thermistor (TH22) Normal Abnormal Gas pipe temperature 4.3k ~9.6k Open or short thermistor (TH23) Vane motor (MV)
  • Page 32 PKFY-P18NFMU-E PKFY-P24NFMU-E PKFY-P30NFMU-E Parts name Check points Room temperature Disconnect the connector then measure the resistance using a tester. thermistor (TH21) (Surrounding temperature 50°F~86°F) Liquid pipe temperature thermistor (TH22) Normal Abnormal 4.3k ~9.6k Open or short Gas pipe temperature thermistor (TH23) Fan motor (MF) Measure the resistance between the terminals using a tester.

  • Page 33: Linear Expansion Valve

    < Thermistor for lower temperature > <Thermistor characteristic graph> Room temperature thermistor (TH21) Thermistor for Liquid pipe temperature thermistor (TH22) lower temperature Gas pipe temperature thermistor (TH23) Thermistor R =15k' ± 3% Fixed number of B=3480 ± 2% Rt=15exp { 3480( 273+(t-32)/1.8 30_F 15.8k'...
  • Page 34 <Output pulse signal and the valve operation> Output Output (Phase) Closing a valve : 1 → 2 → 3 → 4 → 1 Opening a valve : 4 → 3 → 2 → 1 → 4 The output pulse shifts in above order. * 1.
  • Page 35 9-2. FUNCTION OF DIP SWITCH PKFY-P06NAMU-E PKFY-P08NAMU-E Operation by switch Switch Pole Function Remarks Thermistor <intake temperature Built-in remote controller Indoor unit Address board detection> position Filter clogging detection Provided Not provided <Initial setting> Filter sign indication 2,500hr 100hr Air intake ( 2)
  • Page 36 PKFY-P12NGMU-E PKFY-P15NGMU-E Operation by switch Switch Pole Function Remarks Thermistor <intake temperature Built-in remote controller Indoor unit Address board detection> position <Initial setting> Filter clogging detection Provided Not provided Filter cleaning 2,500hr 100hr 1 2 3 4 5 6 7 8 9 10 Fresh air intake Effective Not effective...
  • Page 37 PKFY-P18NFMU-E PKFY-P24NFMU-E PKFY-P30NFMU-E Operation by switch Switch Pole Function Remarks Thermistor <intake temperature Built-in remote controller Indoor unit Address board detection> position <Initial setting> Filter clogging detection Provided Not provided Filter cleaning 2,500hr 100hr 1 2 3 4 5 6 7 8 9 10 Fresh air intake Effective Not effective...
  • Page 38 PKFY-P06NAMU-E PKFY-P08NAMU-E PKFY-P12NGMU-E PKFY-P15NGMU-E PKFY-P18NFMU-E PKFY-P24NFMU-E PKFY-P30NFMU-E Switch Pole Operation by switch Remarks SW11 Address board 1st digit Address can be set while the address SW12 SW11 unit is stopped. setting Address setting should be done when M-NET Initial setting <...

  • Page 39: Disassembly Procedure

    DISASSEMBLY PROCEDURE Be careful when removing heavy parts. PKFY-P06NAMU-E PKFY-P08NAMU-E OPERATING PROCEDURE PHOTOS&ILLUSTRATIONS 1. REMOVING THE LOWER SIDE OF THE INDOOR UNIT FROM THE INSTALLATION PLATE Figure 1 Figure 2 When there is removing plate (1) Remove the corner box at right lower side of the indoor unit.
  • Page 40 OPERATING PROCEDURE PHOTOS&ILLUSTRATIONS 3. REMOVING THE INDOOR MICRO CONTROLLER BOARD Electrical box cover Photo 2 AND INDOOR POWER BOARD (1) Remove the front panel. (Refer to 2) (2) Remove the electrical box cover (screw 4 × 10). (Refer to the Photo 2) INDOOR MICRO CONTROLLER BOARD (1) Disconnect the following connectors on the indoor micro controller board.
  • Page 41 OPERATING PROCEDURE PHOTOS&ILLUSTRATIONS 5. REMOVING THE NOZZLE ASSEMBLY Photo 5 Heat exchanger Electrical box (1) Remove the front panel (Refer to 2). (2) Remove the electrical box cover. (3) Disconnect the connector (CN5V) on the indoor micro con troller board. (4) After unhook the right side of the corner box, press the upper left side and remove the corner box.

  • Page 42: Operation Procedure

    PKFY-P12NGMU-E PKFY-P15NGMU-E OPERATION PROCEDURE PHOTOS & ILLUSTRATION Hook Figure 1 1. REMOVE THE LOWER SIDE OF THE INDOOR UNIT FROM THE INSTALLATION PLATE (1) Remove the left / right corner box of the indoor unit. (2) Hold and pull down the lower and both ends of the indoor unit, and remove the ▼...
  • Page 43 OPERATION PROCEDURE PHOTOS & ILLUSTRATION Photo 4 4. REMOVING THE VANE MOTOR (1) Disconnect the connector CN6V on the indoor controller Set screws Nozzle board. assembly (2) Remove the 2screws of the vane motor, disconnect the lead wire and remove the vane motor from the shaft. Lead wire Vane motor 5.
  • Page 44 OPERATION PROCEDURE PHOTOS & ILLUSTRATION 9. REMOVING THE LINE FLOW FAN Photo10 (1) Remove the terminal block cover. (2) Remove the front panel. (see the Photo 1) Heat exchanger (3) Remove the electrical parts box. (see the Photo 7) (4) Remove the nozzle assembly. (see the Photo 6) (5) Remove the fan motor.
  • Page 45 PKFY-P18NFMU-E PKFY-P24NFMU-E PKFY-P30NFMU-E OPERATING PROCEDURE PHOTOS & ILLUSTRATION 1. Removing the lower side of the indoor unit from the Figure 1 installation plate Hanger of indoor unit (1) Remove the 2 screws. Hang the indoor unit hangers to the catches on the instal- Catch of installation plate lation plate.
  • Page 46 OPERATING PROCEDURE PHOTOS & ILLUSTRATION (7) Remove the indoor controller board case. Photo 3 Then the Power board and the capacitor can be serviced. Capacitor Power board Terminal block Electrical parts box 5. Removing the vane motor (1) Remove the right side panel. Photo 4 Indoor controller board (2) Remove the screw of the electrical parts box cover, and...
  • Page 47 OPERATING PROCEDURE PHOTOS 8. Removing the lineflow fan and the fan motor (1) Remove the left and right side panels. Photo 7 (2) Remove the grilles. (3) Remove the electrical parts box. Screw Lineflow fan (4) Remove the drain pan. (5) Loosen the screw that fixes the lineflow fan to the fan Fan motor motor.

  • Page 48: Parts List

    PARTS LIST (non-RoHS compliant) PANEL PARTS PKFY-P06NAMU-E PKFY-P08NAMU-E Q'ty / set Price Wiring Recom- Remarks No. Parts No. Parts Name Specifications PKFY-P · NAMU-E Diagram mended Unit Amount (Drawing No.) Symbol Q'ty 06 / 08 R01 22A 635 R01 22A 651...
  • Page 49 ELECTRICAL PARTS PKFY-P06NAMU-E PKFY-P08NAMU-E TEMP. ON/OFF 11 12 Q'ty / set Price Wiring Recom- Remarks Specifications PKFY-P · NAMU-E No. Parts No. Parts Name Diagram mended Unit Amount (Drawing No.) Symbol Q'ty 06 / 08 T7W B00 675 FAN GUARD...
  • Page 50 HEAT EXCHANGER PARTS PKFY-P06NAMU-E PKFY-P08NAMU-E Q'ty / set Price Wiring Recom- Remarks No. Parts No. Parts Name Specifications PKFY-P · NAMU-E Diagram mended Unit Amount (Drawing No.) Symbol Q'ty 06 / 08 T7W K10 480 HEAT EXCHANGER With connection pipe...
  • Page 51 STRUCTURAL PARTS PKFY-P12NGMU-E PKFY-P15NGMU-E Q'ty / set Wiring Recom- Remarks Price Parts Name Specifications PKFY-P · NGMU-E Diagram mended Parts No. (Drawing No.) Symbol Q'ty Unit Amount 12 / 15 R01 89Y 651 FRONT PANEL R01 07Y 092 VANE SLEEVE R01 07Y 691 FRONT GRILLE R01 A16 500...
  • Page 52 TH23 T7W E06 130 MOTOR SUPPORT R01 E63 401 LINEAR EXPANSION VALVE PAR-21MAA — REMOTE CONTROLLER T7W E00 294 ADDRESS BOARD T7W E02 304 ADDRESS CABLE This REMOTE CONTROLLER is made by AIR-CONDITIONING & REFRIGERATION SYSTEMS WORKS,. MITSUBISHI ELECTRIC CORPORATION.
  • Page 53 STRUCTURAL PARTS PKFY-P18NFMU-E PKFY-P24NFMU-E PKFY-P30NFMU-E Q'ty / set Price Wiring Recom- Remarks PKFY-P · NFMU-E Part No. Part Name Specification Diagram mended (Drawing No.) Symbol Q'ty Unit Amount R01 12G 662 LEFT SIDE PANEL R01 E01 812 UNDER PLATE R01 E00 812 UNDER PLATE R01 E00 811 NOSE...
  • Page 54 ELECTRICAL PARTS PKFY-P18NFMU-E PKFY-P24NFMU-E PKFY-P30NFMU-E TEMP. ON/OFF Q'ty / set Price Wiring Recom- Remarks PKFY-P · NFMU-E Part No. Part Name Specification Diagram mended (Drawing No.) Symbol Q'ty Unit Amount R01 Z61 102 BEARING MOUNT R01 12G 103 SLEEVE BEARING R01 13G 114 LEFT LINEFLOW FAN R01 16G 114...
  • Page 55 R01 16G 115 SLEEVE BEARING R01 005 103 BEARING MOUNT R01 KV5 102 FAN GUARD T7W B02 675 FAN GUARD T7W B03 675 REMOTE CONTROLLER PAR-21MAA — This REMOTE CONTROLLER is made by AIR-CONDITIONING & REFRIGERATION SYSTEMS WORKS,. MITSUBISHI ELECTRIC CORPORATION.

  • Page 56: Rohs Parts List

    RoHS PARTS LIST PANEL PARTS PKFY-P06NAMU-E PKFY-P08NAMU-E Q'ty / set Price Wiring Recom- Remarks Parts No. Parts Name Specifications PKFY-P · NAMU-E Diagram mended Unit Amount (Drawing No.) Symbol Q'ty 06 / 08 R01 23A 635 R01 23A 651 FRONT PANEL...
  • Page 57 ELECTRICAL PARTS PKFY-P06NAMU-E PKFY-P08NAMU-E TEMP. ON/OFF 11 12 Q'ty / set Price Wiring Recom- Remarks Parts No. Parts Name Specifications PKFY-P · NAMU-E Diagram mended Unit Amount (Drawing No.) Symbol Q'ty 06 / 08 T7W 23A 675 FAN GUARD R01 23A 530...
  • Page 58 HEAT EXCHANGER PARTS PKFY-P06NAMU-E PKFY-P08NAMU-E Q'ty / set Price Wiring Recom- Remarks Parts No. Parts Name Specifications PKFY-P · NAMU-E Diagram mended Unit Amount (Drawing No.) Symbol Q'ty 06 / 08 T7W K34 480 HEAT EXCHANGER With connection pipe R01 H05 401...
  • Page 59 STRUCTURAL PARTS PKFY-P12NGMU-E PKFY-P15NGMU-E Q'ty / set Wiring Recom- Price Remarks Specifications PKFY-P · NGMU-E Diagram mended Parts No. Parts Name (Drawing No.) Symbol Q'ty Unit Amount 12 / 15 FRONT PANEL R01 E05 651 VANE SLEEVE R01 08Y 092 FRONT GRILLE R01 08Y 691 AIR FILTER...
  • Page 60 TH23 T7W E10 130 MOTOR SUPPORT R01 H05 401 LINEAR EXPANSION VALVE PAR-21MAA — REMOTE CONTROLLER T7W E01 294 ADDRESS BOARD T7W E06 304 ADDRESS CABLE This REMOTE CONTROLLER is made by AIR-CONDITIONING & REFRIGERATION SYSTEMS WORKS,. MITSUBISHI ELECTRIC CORPORATION.
  • Page 61 STRUCTURAL PARTS PKFY-P18NFMU-E PKFY-P24NFMU-E PKFY-P30NFMU-E Q'ty / set Price Wiring Recom- Remarks PKFY-P · NFMU-E Part No. Part Name Specification Diagram mended (Drawing No.) Symbol Q'ty Unit Amount R01 14G 662 LEFT SIDE PANEL R01 E02 812 UNDER PLATE R01 E03 812 UNDER PLATE R01 E00 811 NOSE...
  • Page 62 ELECTRICAL PARTS PKFY-P18NFMU-E PKFY-P24NFMU-E PKFY-P30NFMU-E TEMP. ON/OFF Q'ty / set Price Wiring Recom- Remarks PKFY-P · NFMU-E Part No. Part Name Specification Diagram mended (Drawing No.) Symbol Q'ty Unit Amount R01 Z61 102 BEARING MOUNT R01 E04 103 SLEEVE BEARING R01 E23 114 LEFT LINEFLOW FAN R01 19G 114...
  • Page 63 R01 19G 115 R01 E03 103 SLEEVE BEARING BEARING MOUNT R01 KV5 102 T7W E15 675 FAN GUARD FAN GUARD T7W E16 675 — REMOTE CONTROLLER PAR-21MAA This REMOTE CONTROLLER is made by AIR-CONDITIONING & REFRIGERATION SYSTEMS WORKS,. MITSUBISHI ELECTRIC CORPORATION.
  • Page 64 HEAD OFFICE : TOKYO BLDG., 2-7-3 MARUNOUCHI CHIYODA-KU , TOKYO 100-8310 , JAPAN cCopyright 2005 MITSUBISHI ELECTRIC ENGINEERING CO., LTD. Distributed in May 2009 No. OC342 REVISED EDITION-C PDF 7 Distributed in May 2009 No. OC342 REVISED EDITION-B PDF 7 Distributed in Aug.

This manual is also suitable for:

City multi pkfy-p15ngmu-eCity multi pkfy-p18nfmu-eCity multi pkfy-p24nfmu-eCity multi pkfy-p30nfmu-eCity multi pkfy-p08namu-eCity multi pkfy-p12ngmu-e

Table of Contents