Cleaning The Air Filter - Sony VPL-FE40 Quick Reference Manual

9
Press the MENU key, and then select the
Setup menu.
10
Select "Lamp Timer Reset", and then
press the ENTER key.
A message is displayed.
11
Select "Yes", and then press the ENTER
key.
The Lamp Timer is initialized to 0, and
"Lamp Timer Reset Complete!" is
displayed in the menu screen.
12
Select "OK."
Caution
Do not put your hands into the lamp replacement
slot, and do not allow any liquid or other objects
into the slot to avoid electrical shock or fire.
Note
To erase a message, press any key on the control
panel of the projector or on the Remote
Commander.
Disposal of the used lamp
For the customers in the USA
Lamp in this product contains mercury.
Disposal of these materials may be regulated
due to environmental considerations. For
disposal or recycling information, please
contact your local authorities or the Electronic
Industries Alliance (www.eiae.org).
Cleaning the Air
Filter
The air filter should be cleaned whenever you
replace the lamp.
Remove the air filter, and then remove the dust
with a vacuum cleaner.
The time needed to clean the air filter will vary
depending on the environment or how the
projector is used.
1
Turn the power off and unplug the power
cord.
2
Remove the air filter covers.
The air filter of the VPL-FX41/FW41 is on
one side only.
3
Remove the air filter from the each claws
(6 positions) on the air filter cover.
4
Clean the air filter with a vacuum cleaner.
5
Attach the air filter so that it fits into the
each claws (6 positions) on the air filter
covers and replace the cover.
Caution
If you neglect to clean the air filter, dust may
accumulate, clogging it. As a result, the
temperature may rise inside the unit, leading to
a possible malfunction or fire.
Notes
• If the dust cannot be removed from the air filter,
replace the air filter with a new one.
For details on new air filter, consult with
qualified Sony personnnel.
• Be sure to attach the air filter cover firmly; the
power can not be turned on if it is not closed
securely.
• The air filter has face and reverse side. Attach
the air filter so that the frames on the air filter
are visible.
• To erase a message, press any key on the control
panel of the projector or on the remote
commander.

Cleaning the Air Filter

Claws
11
GB