Panasonic CF-19 Series Reference Manual page 74

Disabling/Enabling Wireless Communication
74
NOTE
If you uninstall the Wireless Switch Utility, set the wireless switch to ON beforehand.
Do not turn on/off the switch repeatedly at too short intervals.
Do not restart, log off, or enter standby or hibernation immediately after turning on/off the switch.
Do not turn on/off the switch while Windows is starting up.
To use wireless communication, set the wireless device ([Wireless LAN] / [Bluetooth] / [Wireless WAN]) to [Enabled]
(default) in the [Advanced] menu of the Setup Utility ( page 90).
When you set [Wireless Switch] to [Disabled] in the [Advanced] menu of the Setup Utility ( page 90), the Wireless
Switch Utility icon will not appear in the notification area. All wireless equipment (wireless LAN, Bluetooth, wireless
WAN) will remain ready irrespective of the wireless switch setting.
It may take some time to turn off wireless communication after switching the wireless switch off.
If the IEEE802.11a setting is changed in [Device Manager] ( page 80), the display will be changed accordingly.
®
You can check the wireless LAN communication status in Intel PROSet/Wireless Software. Perform either of the fol-
lowing procedures.
, , or
• Double-click , on the notification area.
• Click [start] - [All Programs] - [Intel PROSet Wireless] - [WiFi Connection Utility].