Replacing The Hard Disk Drive; Removing The Drive Frame With Cd-Rom, Hard Disk, And 3.5-Inch Diskette Drives - Acer Power 2100 User Manual

2. Disconnect the drive cables, then pull the disk frame holding the CD-ROM drive, hard drive, and the 3.5-inch
diskette drive.
Figure 4-6 Removing the Drive Frame with CD-ROM, Hard Disk, and 3.5-inch Diskette Drives
3. When the drives have been removed, you can now access the system board and the riser card.
To reassemble the system:
To reassemble the system, simply reverse the procedure. However, before you reassemble your system, make sure
that you have installed all necessary components and connected the cables.
4.4

Replacing the Hard Disk Drive

1. Detach the hard disk drive bay from the disk drive metal frame by removing the screw as shown below.
AcerPower 2100 (V66LT/IDB3-C) User's Guide
96