JVC HR-DVS3U Quick Reference Manual

JVC HR-DVS3U

Quick Reference

NOTE: If the tapes have not been rewound, both decks will rewind automatically.
When both decks have fi nished rewinding, dubbings begins automatically.
After either tape has reached the end the decks will rewind both tapes automatically and eject them. The VCR then shuts off.
Dubbing a Scene or Part of a Tape
You can dub selected scenes on a tape, starting and stopping wherever you wish.
1. Insert a VHS/S-VHS cassette and a mini-DV cassette.
2. SELECT DUBBING DIRECTION:
Press --> when you want playback on the DV deck and recording on the S-VHS deck.
OR
Press <-- when you want playback on the S-VHS deck and recording on the DV deck.
3. LOCATE START POINT:
For the playing deck:
Press S-VHS or DV to select the side you're playing.
Press PLAY to start playback of the tape in the play deck and press PAUSE to pause playback when you fi nd the point where you
want to start dubbing.
NOTE: To fast-forward or rewind the tape, turn the jog/shuttle wheel on the bottom right hand side of the deck. To jog through the
tape frame by frame, press the wheel once while the tape is playing, then turn the wheel.
Guide
Dubbing an Entire Tape
1. SELECT DUBBING DIRECTION:
Press --> when you want playback on the DV deck and record-
ing on the S-VHS deck. Insert a blank VHS/S-VHS cassette
and a mini-DV cassette with content. A green arrow by the
word DV will illuminate.
OR
Press <-- when you want playback on the S-VHS deck and
recording on the DV deck. Insert a VHS/S-VHS cassette with
content and a blank mini-DV cassette. A green arrow by the
word S-VHS will illuminate.
2. Press DUB for two seconds.
1