Battery And Liquid Propane Tank Installation; Connecting Regulator To The Lp Tank - Kenmore 122.33492410 Use & Care Manual

11. Battery and Liquid Propane Tank Installation

Unscrew the electronic ignition button and place the battery
into the compartment with the positive terminal
(+) facing outward. Replace the ignition button after the
battery has been installed.
From the front of cart, place LP Tank into the hole in bottom
panel. Secure the tank in place by turning the wing nut bolt to
the right.

Connecting Regulator To The LP Tank

1. LP tank must be properly secured onto grill. (Refer to
assembly section.)
2. Turn all control knobs to the OFF position.
3. Turn LP tank OFF by turning OPD hand wheel clockwise to a
full stop.
4. Remove the protective cap from LP tank valve. Always use
cap and strap supplied with valve.
Safety Relief
Valve
20
OPD Hand Wheel
Type 1 outlet with
thread on outside
Strap and Cap
Do not insert a POL transport plug
(plastic part with external threads)
into the Type 1 tank valve outlet . It
will defeat the Safety Relief Valve
feature.