Dell 1000W Getting Started page 19

Carefully position the cabinet upright.
8
Connecting the Equipment
If you plan to use Dell UPS Management Software, connect your computer to the USB port using
1
the supplied cable.
If your rack has conductors for grounding or bonding of ungrounded metal parts, connect the
2
ground cable (not supplied) to the ground bonding screw.
If an emergency power-off (disconnect) switch is required by local codes, see "Installing Remote
3
Emergency Power-off" (REPO) in the Dell Line-Interactive Rack UPS 1000W, 1920/1500W, and
2700/2300W User's Guide.
Plug the equipment to be protected into the UPS output receptacles, but do not turn on the
4
protected equipment.
NOTE:
Verify that the total equipment ratings do not exceed the UPS capacity to prevent an overload alarm.
Getting Started With Your System
15
|