Freezer
"+39" – "-39" steady light:
"-15" – "-24" flashing light:
"+39" – "-39" flashing light:
"+39" – "-8"
steady light:
"A" o "SP"
steady light:
steady light:
"E"
steady light:
"P"
steady light:
ERF2000 Functions of the electronic boards Rev. 01
It shows the highest temperature in the freezer.
It is indicated during the temperature setting operation. It
disappears 5 sec after the end of the temperature setting.
It appears when the freezer temperature is higher than the alarm
value (between - 8°C and -12°C according to the models) and
when this temperature is returned to lower value after the alarm.
It indicates the highest temperature in the compartment after a
current interruption (shown for 5 sec after pushing reset button.
Simultaneously the pilot lamp switches off).
It indicates the super cooling function.
Air sensor fault in the freezer.
It indicates incompatibility between the electronic boards.
Solution: check the part nos. of the electronic boards.
It indicates an Eeprom error (wrong or not readable parameters).
Solution: replace both electronic boards (power and display).
24/30