Using The Gas Hob; Switching On, Controlling, Switching Off - Miele KM 362 Operating Instructions Manual

Switching on, controlling,
switching off
The control knobs are used to switch on
the burner and regulate the strength of
the flame.
ß the gas supply is turned off
& strong flame
/ weak flame

Using the gas hob

The burners can only be switched
on by pressing in the appropriate
control and turning it anti-clockwise,
and switched off by turning the
control clockwise.
The following can damage
components in the appliance:
- Trying to switch on a burner
without pressing in the control.
- Switching on a burner by
turning it clockwise.
- Switching off a burner by
turning it anti-clockwise,
The manufacturer cannot be held
liable for this type of damage.
Switching on:
^ The control knob for the burner
required must be pressed in and
turned anti-clockwise to the large
flame symbol to switch on.
^ When the flame ignites, keep the
control pressed in for 8-10 seconds,
and then let it go.
If the flame goes out, repeat the
procedure, keeping the control knob
pressed in for a few extra seconds.
15