Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Zanussi ZDT 6253
Summary of Contents for Zanussi ZDT 6253
- Page 1 DISHWASHER ZDT 6253 COP04 INSTRUCTION BOOK 152975 52/0...
-
Page 2: Description Of The Appliance
Description of the appliance Levelling spacers Upper basket stop Upper spray arm Salt container Large filter Detergent dispenser Control panel Rating plate Rinse aid dispenser 10. Central filter 11. Lower spray arm 12. Upper basket 13. "SID" detergent dispenser (Super Intensity Dispenser) IN84 The control panel In this fully integrated appliance the controls are located on... -
Page 3: Washing Programmes
Washing programmes Programme Type of load Required Recommended Cycle quantity of detergent push buttons description degree of soil wash prewash On/Off Any. Partial load (to be RINSE AND 1 cold rinse (to avoid food scraps from sticking together) completed later in the day) HOLD RINSE AND HOLD Hot prewash... -
Page 4: Operating Sequence
Operating sequence 1. Check the filters 9. At the end of the washing Ensure they are clean and properly positioned (see programme "Maintenance and cleaning"). The dishwasher will automatically stop and an audible signal informs you that the programme has ended. The "end of cycle"... -
Page 5: Using Your Appliance
Using your appliance Loading your appliance The upper basket Before placing dishes in the machine, remove any scraps of The upper basket is designed for plates (dessert plates, food, to avoid clogging the filters and consequently reducing saucers, dinner plates of up to 24 cm in diameter), salad the performance. -
Page 6: Hints For Test Centres
Hints for test centres Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser. Test standard EN 50242 Reference programme: BIO 50°c Load: 12 standard place settings Rinse aid selector: position 5 Detergent dosage :... -
Page 7: Service And Spare Parts
Standard guarantee conditions We, Zanussi, undertake that if within 24 months of the date of purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: The appliance has been correctly installed and used only on the electricity supply stated on the rating plate. - Page 8 From the Electrolux Group. The world’s No.1 choice. The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx.
-
Page 9: Table Of Contents
Instruction Book DISHWASHER - Before use - Maintenance - Installation Contents Before use External cleaning Setting the water softener Prolonged periods of non-operation Filling with salt Frost precautions Filling with rinse aid and adjusting the dose Moving the machine Use of detergent Something not working Hints and tips Installation... -
Page 10: Before Use
Before use Before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance SO322 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with 2. -
Page 11: Filling With Rinse Aid And Adjusting The Dose
Rinse aid Use of detergent Only use detergents specifically designed for use in Rinse aid is automatically added during the last rinse, dishwashers. ensuring thorough rinsing, and spot and streak free drying. The dispenser, which is positioned inside the door, holds We recommend the use of Finish detergents which are about 110 ml of rinse aid, which is sufficient for 16 - 40 available in the following options:... -
Page 12: Hints And Tips
Hints and tips To save energy Place dishes in the machine immediately after every meal and wait until the dishwasher is full before washing. If necessary run the Rinse and Hold programme (see "Washing Programmes" chart) so that any food scraps do not become caked on the dishes while you are waiting to run the complete wash programme. -
Page 13: Maintenance And Cleaning
Maintenance and cleaning Internal cleaning The dishwasher must not be used without filters. Incorrect repositioning and fitting of the filters will Ensure that the seals around the door, the detergent and rinse produce poor washing results. aid dispensers are cleaned regularly with a damp cloth. Cleaning the filters is vital to ensure correct operation of We recommend the use of Finish Dishwasher Cleaner every the machine. -
Page 14: Something Not Working
Something not working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. The dishwasher is fitted with a number of alarm systems which can help you to quickly determine the cause of any problems. In the case of alarm intervention the dishwasher will not start or stops during operation, all push buttons are inoperative except for the ON/OFF push button. -
Page 15: Installation
Installation Any electrical work required to install this appliance The sink plug must not be in place when the machine is should be carried out by a qualified electrician or draining as this could cause the water to siphon back into the competent person. - Page 16 This appliance complies with the following E.E.C. Directives: - 73/23 or 19.2.73 (Low Voltage Directive) and subsequent modifications; - 89/336 or 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications. 152981 51/2 2 01/02...