Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZKL 850 LX
Summary of Contents for Zanussi ZKL 850 LX
- Page 1 CERAMIC BUILT-IN HOB ZKL 850 LX OPERATING INSTRUCTIONS...
-
Page 2: Dear Customer
Dear Customer Please read these operating instructions carefully. Please make sure you read the safety instructions on the first pages of these operating instructions! Keep the operating instructions for future reference. Pass them on to any future owners. With the warning triangle and/or by means of key words (Warning!, Caution!, Important!), information is emphasized which is important for your safety or the correct functioning of the... -
Page 3: Table Of Contents
Content Safety Instructions ............. . . Electrical Safety . -
Page 4: Safety Instructions
Safety Instructions The safety aspects of this appliance comply with the accepted technical standards and the applicable safety regula- tions. Nevertheless, we consider it our obligation to make you aware of the following safety information: Electrical Safety How to Avoid Damage to Your Appliance The new appliance may only be installed and con- nected up by qualified personnel, according to the... -
Page 5: Disposal
Disposal Disposing of the Packaging Material All packaging material can be recycled, shee- ting and hard foam parts are appropriately marked. Please dispose of the packaging ma- terial and any old appliance properly. Please observe national and regional regula- tions on appliances and packaging material, and the markings on the materials (material separation, waste collections, recycling de- pots). -
Page 6: Appliance Description
Appliance Description Features of the hob Rapid Cooking zone (double–ring) Ø 210/120 mm Rapid Cooking zone Ø 145 mm Rapid Cooking zone (double–ring) Ø 170x265 mm Rapid Cooking zone Ø 145 mm Residual heating indicators Control knobs Prior to Using for the first Time Initial Cleaning Wipe the ceramic glass cooking surface with a damp cloth to remove any traces left from manufacturing. -
Page 7: Operation Of The Cooking Surface
Operation of the cooking surface When the cooking zones are switched on, they may hum briefly. This is a characteristic of all ceramic glass cooking zones and does not im- pair either the function or the life of the applian- Control knobs The control knob is used to set the required heat output continuously from 1–10. -
Page 8: Usage, Tips
Usage, Tips Pans The better the pan, the better the results. You can recognise good pans by their bases. The base should be thick and as flat as possible. Pay attention to the base diameter when purchas- ing pots or pans. Manufacturers often indicate the diameter of the upper edge of pots and pans. -
Page 9: Cleaning And Care
Cleaning and care Important: Cleaners must not come into con- tact with the ceramic glass when hot! All clea- ners must be removed with plenty of clean wa- ter after cleaning as they may have a caustic effect when the rings are next heated! Do not use any aggressive cleaners, such as e.g. -
Page 10: Heavy Soilage
Heavy Soilage 1. Remove burnt on sugar, melted plastic, aluminium foil or other melted materials immediately, while the hob is still hot, using a glass scraper. Important: When using the glass scraper on the hot cooking zone, there is a risk of burns! 2. -
Page 11: Something Not Working
Something not working Please check whether you can rectify small faults on the appliance yourself with the help of the following information. Should this information be of no assistance in a specific case, please contact your local Service Force Centre. Warning! Repairs to the appliance should only be carried out by approved service engineers. -
Page 12: Installation Instructions
Technical data Appliance Dimensions Width 766 mm Depth 506 mm Height 49 mm Cut-Out Dimensions 941 591 737 Prod-nr: ZANUSSI Serie 7.0 kW 230V, 230V 2, 400V 2-3N ~50 Hz Width 750 mm ZKL850LX Typ 211.1FBPGNAPNNA Depth 490 mm Power Consumption... -
Page 13: Safety Instructions For The Installer
Safety Instructions for the Installer The mains connection must be with a cable with a plug or there must be a disconnecting device with at least 3 mm contact opening in the existing do- mestic electrical installation, which disconnects the dishwasher completely from the mains supply in accordance with NIN 2000. -
Page 14: Installing Into A Kitchen Worksurface
Installing into a kit chen worksurface Make a note of the serial number on the ap- pliance rating plate prior to installation. This number will be required in the case of requests for service and is no longer accessible after in- stallation, as it is on the original rating plate on the underside of the appliance. -
Page 15: Electrical Connection
Electrical connection A type H05VV–F or higher quality lead must be used for the mains connection. The mains connection terminal is on the bottom of the appliance behind a cover. Komponenten–Spannung: 230 V The cooking appliance should be connected as shown Component Voltage: on the connection diagram, depending on the mains supply voltage. -
Page 16: Service
Customer Care For general enquiries concerning your Zanussi ap- pliance or for further information on Zanussi products, please contact our Customer Care Department by let- ter or telephone as follows: Customer Care Department Zanussi 55–77 High Street... - Page 18 374 3670 00 05.01 mh...